Fun In B.C.  

Welcome to the Fun In B.C. forums. your outdoor adventure headquarters.

As guest on our site, you have the chance to take a look around and get an idea of what we're all about. Feel free to check out some of the current topics of discussion and some of the stories of adventure gone by, by clicking on the top right picture to view past "Pictures of the week" .

Don't be shy, come on in. By joining our free community you'll be able to join in the fun with other outdoor adventurers and find out about upcoming events. you will also get access to View posted pictures. Stop sitting on the outside looking in, join today it's easy and it's FREE.

It's time for you to start having FUN..... in BC!!

If you have any problems with the registration process or your account login, please contact contact support.

HOTMAIL USERS: Check your 'junk mail' folder for the confirmation message and add 'funinbc.com' to your safe list so you don't miss anymore important emails from us.

Go Back   Fun In B.C. > All about your Ride > suzuki Talk

Reply
 
Thread Tools
  #1  
Old 05-18-2007, 07:51 PM
rs9000 rs9000 is offline
Prospect
 
Join Date: Jan 2006
Location: Maple ridge
Posts: 277
rs9000 Unknown Newbie
Reputation: 10
rear axle seal and bering

got a 1990 samurai need to put in a rear axle seal and a bering how big of a job is this never done one ? have a shop full of tools and every thing i could possibly need
__________________
1986 22re 5spd sas'd new motor 35's front locker
Reply With Quote
  #2  
Old 05-19-2007, 08:06 PM
bigguysmalltruck bigguysmalltruck is offline
Outback adventurer
 
Join Date: Nov 2006
Location: maple ridge(almost Whonnock,but not quite Ruskin)
Posts: 80
bigguysmalltruck Unknown Newbie
Reputation: 10
the only bitch i had on my sj was pullin the axl.the bearing is pressed onto the axl,so a slide-hammer or at least some chain and a good tug is a must.the axl seal popps out with a screwdriver and you pound the new one in with a socket or piece of tube that is the seme diameter as the seal.put a little silicone around the seal before u put it in.
__________________
[/SIGPIC] sometimes i need a hug'82 SJ410 with shitty gears,open diffs and a really loud stereo
Reply With Quote
  #3  
Old 05-24-2007, 08:45 AM
Mattse.cx Mattse.cx is offline
Newbie
 
Join Date: Jul 2006
Posts: 6
Mattse.cx Unknown Newbie
Reputation: 10
I pulled my axles recently, and rather than pony up for a slide hammer I made one of my own.

With some thick wire, loop several times around the drum studs, leaving a long loop with several winds of wire sticking straight out. Put the nuts on the studs to hold the wire on. Grab your regular hammer, and slide it back and forth inside of the long winds of wire. Bingo - your axle should pop out.
Reply With Quote
  #4  
Old 05-24-2007, 08:26 PM
sobe sobe is offline
Gettin' out havin' fun
 
Join Date: Apr 2007
Location: N. Delta
Posts: 418
sobe Unknown Newbie
Reputation: 10
Not really that bad. I pulled both axles on my 410 recently to upgrade the drums. Really wasn't as difficult as I had thought it may be.
__________________
Do you suffer from poor judgment?Logical decisions a problem?Try sterilization.It may be right for you.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Style Design By: Resourcelabz.se