View Single Post
  #4  
Old 04-22-2004, 08:52 AM
richsworkshop's Avatar
richsworkshop richsworkshop is offline
Prospect
 
Join Date: Jan 2003
Location: Ok-an-agan
Posts: 296
richsworkshop bad newbie
Reputation: 0
I ended up with one, and was able to stumble across a parts winch as well!

Both of mine are 10000 lb units, and the guy I got it from also had the ORIGINAL paperwork IE manual with it. It came with all the drawings and dimensions on the parts and stuff. All I have had to do to mine really is swap electric motors. Looking at the internals and stuff, it's kinda neat how that thing works. (drawings help)

One thing with them is they are BIG and the roller fairlead is integral with the case. You can however change them from an upright to a.... well... reclined mount, depending on where and how you are mounting them.

Bummer is I broke one of the fairlead rollers off.....

Will probably cut the others off and have a seperate farilead.

Rich [}] (aka Stax)
"It's ALL GOOD!"

TTC 2003
Been there... done that... What a Blast!
Reply With Quote