Squish's 4 Seater Buggy Build Page...
i guess its a heep, so ill post it here, unfortunately...
being shipped monday so progress should be made soon, if i can, i will have it ready for the spudspudspudspudspud run(if i happens) if not it will be ready for my birthday weekend end of march
here is the specs to be....
Ex werock legend spec buggy(if i decide to go 37`s i can compete in the legend spec class, not sure yet)
half a tj frame, tj grill and hood
tires: will either go sx, irok or pitbull rockers, no idea on the size yet
suspension: coilovers all 4 corners, air bumps all corners, linked front and rear(3 link with a panhard front, not sure the link setup for the back yet)
stering: PSC hydro assist 8ìnch ram, have ott histeer arms, but may have to sell and buy some that are drilled to have the tierod run UNDER the arm instead of above(clearance issues im thinking)
motor: 5.0l HO mustang engine, ported heads, intake, b303 cam
trany: pretty sure im going to end up running a c4 with a 1600-1800 stall
transfercase: undecided, may end up with a 4.3:1 or 5:1 atlas or see if my doubler is fixable, and if thats the case, it will run the 208 reduction and a 205 behind that
axles: front- HP D60, 4.88 gears, thinking i may run some sort of selectable locker
rear- hd d60 rear, spindles bored out for 35 spline axles, 35 spline axles, 4.88 gears, detroit or welded.
wheelbase will end up anywhere from 100-110(i believe the old wheelbase was 100ish) depending on how the steering works out
basically a ford wearing heep clothing, everything that was planned for the b2 will be happening on this chassis, which will be the only difference
I got the Jeep thing, now it burns when I pee...
Last edited by Squishy : 01-06-2008 at 03:49 PM.