Fun In B.C.

Fun In B.C. (http://www.funinbc.com/forum/index.php)
-   Ford discussions (http://www.funinbc.com/forum/forumdisplay.php?f=63)
-   -   Clutch fan tool (http://www.funinbc.com/forum/showthread.php?t=125074)

Trailjunkie 06-17-2017 10:07 AM

Clutch fan tool
 
Ok I'm replaceing the water pump in my 2003 f350 7.3 liter power stroke. I hear I need this wrench for the removal of the clutch fan . Any one have one I could borrow for next weekend? Anyone done one of these and know any tricks to make it easier /faster?
Thanks

harvester_sorrow 06-18-2017 10:55 AM

Cut one out of flat bar?

Apathy 06-19-2017 10:49 AM

I was able to remove it with a big pair of channel locks. Did not need the tool. On another note, when you get the water pump. spend the money and get the one that has the inlets and outlets already on it.(some you have to take yours off and put on the new pump) They are a PITA to get sealed. I did mine, then had to do it again due to leaks. I did not head the warning from a friend.. :(

Apathy 06-19-2017 10:54 AM


This guy can be a PITA to seal

pumpkin 06-19-2017 09:57 PM

I use and air chisel, but a hammer and chisel also works well.

4skin 06-20-2017 06:29 PM

It's left thread I believe


All times are GMT -7. The time now is 03:50 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.