Fun In B.C.

Fun In B.C. (
-   Isuzu Chat (
-   -   5.9 oil pan (

vajayjay 03-17-2016 01:10 PM

5.9 oil pan
My dad's dodge(91 2500 4wd) has a leaky oil pan. Not huge but thinking I might fix it for him while he's not allowed to drive. How hard of a job is it? Looks pretty tight to the crossmember.


harvester_sorrow 03-17-2016 02:49 PM

Better just sell it to me.....

vajayjay 03-17-2016 03:41 PM

When did Izuzu start making Dodges?

harvester_sorrow 03-17-2016 05:44 PM

They make the duramax.......

4skin 03-17-2016 06:30 PM

Yup hard to get pan out without pulling motor if not impossible to do
If you can get to where it's leaking or tighten pan bolts
Mine was the tappet cover on side of motor leaking and front cover
Best thing is to clean engine let it dry then fire it up and look for the oil leak
Took five cleanings before I found my leak
And I cheated on the timing cover brake cleaned it up good and ran a bead of right stuff along seam where the leak was and left it for 24 hours no leaks now
This might work for the pan leak

4skin 03-17-2016 06:38 PM

1 Attachment(s)
Or just hose it down with a couple cans of this Attachment 178764

Toyquad 03-17-2016 08:50 PM

I wouldn't want to remove the oil pan on a 5.9 . Looks impossible haha

harvester_sorrow 03-17-2016 09:02 PM

Put the expense OEM o ring on my transmission dip stick, leaked like a sieve. Smeared rtv on the outside, not a drop. Sometimes the redneck fix works

harvester_sorrow 03-17-2016 09:03 PM

Or save yourself the trouble and sell it to me.

You know how unreliable the 12 valves are.... :D

vajayjay 03-18-2016 09:14 AM

I should, this things just been sitting barely driven and always in a garage. It's had a gentle life.

harvester_sorrow 03-18-2016 06:02 PM

I'll treat it the same way you treat your jeeps

Trailjunkie 03-20-2016 06:18 PM

ford sells oil pan sealer i used it on my oil pan where the dip stick tube enters about 4 years ago and never leaked again. my 7.3 also requires removing the cab to lift motor enough to remove oil pan. stupid shit.

Happypants 03-21-2016 10:37 AM

Crossmember will be in the way, u gotta lift the motor, we did my boss's 5.9 not too long ago, was a fuckin cunt, had to use excavator to lift motor cuz hoist wouldn't do it,

harvester_sorrow 03-21-2016 03:20 PM


Originally Posted by vajayjay (Post 1776174)
I should, this things just been sitting barely driven and always in a garage. It's had a gentle life.

I'll trade you a brand new Chinese atv for it......

All times are GMT -7. The time now is 04:06 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.