Fun In B.C.

Fun In B.C. (http://www.funinbc.com/forum/index.php)
-   Nissan chatter (http://www.funinbc.com/forum/forumdisplay.php?f=115)
-   -   Calmini suspension (http://www.funinbc.com/forum/showthread.php?t=110763)

Hellboy 06-06-2011 05:40 PM

Calmini suspension
 
Who sells them in BC?

Looking for this one:

http://www.purenissan.com/wd21_3_kit.htm



Also if anyone knows if there's any other brands that make a pathfinder liftkit that I don't know about :dontknow:

Zibi 06-06-2011 11:32 PM

I've heard bad things about calmini. I know they make a set of balljoint spacers that have a tendency to grenade.

Two major IFS lift kits that everyone installs are OME and AC lifts. OME is ~1.5" and the AC is ~3". Otherwise you can do the generic ZJ coils in the rear and crank tbars in the front.

Go do research on NPORA. There are pages of information on this shit [cheers]

Don't know about BC dealers however. I know there are a couple of OME dealers.

SuzukiSamurai 06-07-2011 12:40 AM

Not sure about any other companies for lifts, but I bought my gears through national and they were calmini... Customer service is terrible and I will not buy from them again, I called there customer service about vibrations and 4wheel drive and they told me that my t case was fucked and had attitude on the phone every time I called about parts, and the whole vibration problem was just bearings, they said either ujoints or fucked shafts

Apathy 06-07-2011 04:11 AM

The calming product is good. Their customer service is not so good. However I do plan on buying their kit for my daily driver

B 06-07-2011 09:41 AM

garbage ... and there customer service is absolutly horrible ...

they left us hanging for month's on a lift kit for a customer after taking payment and when i asked if they could do anything for us for the wait i basicly got told to deal with it ....

i would not recommend them to anyone ...

my2c

FU Toolbag 06-07-2011 01:11 PM

For a grand you should be able to find someone local to do a sas with a toy front axle.

Apathy 06-07-2011 01:59 PM

Quote:

Originally Posted by FU Toolbag (Post 1583446)
For a grand you should be able to find someone local to do a sas with a toy front axle.

too narrow and wrong side drop.

Hellboy 06-07-2011 02:26 PM

Quote:

Originally Posted by Apathy (Post 1583455)
too narrow and wrong side drop.

Sas would be better but not sure what To go with:dontknow:

Maybe I just buy a jeep cause theirs an abundance of aftermarket stuff and use the pathy as a DD

baluch 06-08-2011 12:50 AM

Quote:

Originally Posted by 93pathy (Post 1583232)
Who sells them in BC?

Looking for this one:

http://www.purenissan.com/wd21_3_kit.htm



Also if anyone knows if there's any other brands that make a pathfinder liftkit that I don't know about :dontknow:

If you want bolt-on shit for Nissans, 4x4parts.com is your one-stop shop. Good service, and an incredibly knowledgeable forum. When shipping parts from the US, avoid UPS like the plague, their brokerage fees are retarded.

[cheers]

youngun 06-08-2011 12:57 AM

Their suzuki kits suck ass, i donno about the nissan ones but if they are anything like the sidekick ones STAY AWAY

baluch 06-08-2011 01:01 AM

I've got 50K on their 3" sl with no problems.

Yendor 04-10-2012 10:43 PM

I ordered some Calmini springs for my Pathfinder from NSOR in Langley.

Half Slant 04-12-2012 12:34 PM

Has anyone used the Calmini UCAs? Any thoughts about them? I've heard mixed reviews about them, from customers, and NPORA.

Half Slant 04-12-2012 12:38 PM

Quote:

Originally Posted by Hellboy (Post 1583232)
Who sells them in BC?

Looking for this one:

http://www.purenissan.com/wd21_3_kit.htm



Also if anyone knows if there's any other brands that make a pathfinder liftkit that I don't know about :dontknow:


I believe Rough Country and Trail Master have lift kits available for 87-92.5 models, but if you're like me, and have a 94/95 pathy, you're pretty well SOL. Im still inquiring about the Calmini Lift kit, but like i said in my previous post, mixed reviews is what I've gotten from that.

Apathy 04-12-2012 12:58 PM

Quote:

Originally Posted by heythurr (Post 1645911)
I believe Rough Country and Trail Master have lift kits available for 87-92.5 models, but if you're like me, and have a 94/95 pathy, you're pretty well SOL. Im still inquiring about the Calmini Lift kit, but like i said in my previous post, mixed reviews is what I've gotten from that.

if i'm not mistaken, the kits will work on ALL of teh WD 21's
the only difference suspension wise is the pitman arm (larger diamter shaft on teh steering box) and they have a different spline count on the front CV shafts


All times are GMT -7. The time now is 04:17 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.