Fun In B.C.

Fun In B.C. (http://www.funinbc.com/forum/index.php)
-   Nissan chatter (http://www.funinbc.com/forum/forumdisplay.php?f=115)
-   -   saggy ass pathfindr (http://www.funinbc.com/forum/showthread.php?t=112243)

4skin 10-13-2011 12:57 AM

saggy ass pathfindr
 
room mate picked p a pathfinder for work
with his tools and sterio it looks like a dog fuckin a football
what sugestions you all got
springs from something else ?
cargo coils
air shocks:dontknow:

Balls First 10-13-2011 01:50 AM

Sell it and buy a Jeep

dirka dave 10-13-2011 06:12 AM

I think the infinity models had some sort of air shock or air bag in the rear.

possibly swap thoes in.

could a jeep coil fit in there ?

Chody 10-13-2011 06:36 AM

JGC coil will fix your prob. but when toolsnout it will be lifted 2". mines got airbags

norm 10-13-2011 07:12 AM

Any different springs will change your ride when it is empty, airbags would be your best bet[cheers]

Apathy 10-13-2011 07:15 AM

JGC coils.
If it sits to high, cut htem shorter.
or Early bronco coils. cut the retaining tang off the top.

however, it shouldn't sag that bad.
I had mine completely full of people and watermellons one year (when it was stock) and it wasn't bad.
possibly coils are just plain worn out.

'Balmer 10-24-2011 12:17 PM

JGC coils but you need the .560 diameter ones from a v-8 (not all v-8's have 'em, you gotta bring a mic.)

Chody 10-24-2011 01:07 PM

good tip, i still might go that route

4skin 10-24-2011 03:13 PM

jgc coils in english im not real good at ab

Apathy 10-24-2011 04:51 PM

Jeep Grand Cherokee 4skin.

4skin 10-24-2011 05:20 PM

thanks pathy

Hellboy 10-25-2011 09:17 PM

I might put JGC coils in mine too... The front is saggy as fuck. Actually the whole front end kinda needs work... :dontknow:

Chody 10-26-2011 08:33 AM

coils only work for the back
if the fronts effed, just turn those two screws underneath... tosionbars

Hellboy 10-26-2011 05:30 PM

Quote:

Originally Posted by Chody (Post 1606513)
coils only work for the back
if the fronts effed, just turn those two screws underneath... tosionbars

Lol... my torsionbars are bent and warped... :D

arjan 02-12-2012 01:36 PM

Quote:

Originally Posted by 4skin (Post 1606100)
jgc coils in english im not real good at ab

What is ab? :dontknow: :D

64CJ6Willy 02-12-2012 05:11 PM

abreviations, accromyns

B 02-12-2012 07:05 PM

got a set of used rear coils at the shop that should up that thing 2" in the rear give me a call bruce

atoyot 02-12-2012 07:46 PM

way to much to read.....

..
.
..
but the answer is buy a toyota and prob solved..
.
.
.
.

arjan 02-12-2012 08:07 PM

^^ the 1st & 2nd gen 4Runner didn't sag what-so-ever [15] [15] [15] [15]

4skin 02-12-2012 10:15 PM

holly fuck digging up old threads

arjan 02-12-2012 11:04 PM

It was only about the 5th thread down. Didn't realize the Nissan section was that quiet.

Back to regular programming....

Hellboy 02-24-2012 02:37 PM

Yea its pretty dull in here... We got less problems to talk about than everyone else i guess


All times are GMT -7. The time now is 09:50 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.