Fun In B.C.

Fun In B.C. (http://www.funinbc.com/forum/index.php)
-   Nissan chatter (http://www.funinbc.com/forum/forumdisplay.php?f=115)
-   -   post pics of your NISSANS (http://www.funinbc.com/forum/showthread.php?t=85790)

TwoScoops 10-07-2010 12:05 AM

2 Attachment(s)
First run on Procomp 32"x11.5" MT. work great no prob for full flex with almost all stock.

'Balmer 10-07-2010 10:22 AM

If you yank your rear sway bar you'll get a bit more stretch than that. I didn't notice much of a difference in stability without one...

JeepManager 10-14-2010 10:45 AM

Are most of you guys putting solid axles in the Nissans or do you beef up the IFS somehow?

Apathy 10-14-2010 10:50 AM

You can get upgraded suspension parts, but the issue with the nissan front end is the CV joints.

if your only mild offroading, get a lift, rear locker.. and call it a day.

if your going to be rock crawling.. etc. solid axle is the way to go.

'Balmer 10-14-2010 11:14 AM

Quote:

Originally Posted by Apathy (Post 1531891)
You can get upgraded suspension parts, but the issue with the nissan front end is the CV joints.

if your only mild offroading, get a lift, rear locker.. and call it a day.

if your going to be rock crawling.. etc. solid axle is the way to go.

:s30x: I had lots of fun with mine before I started modding it. Once I started pushing it hard and went to 33's and cranked the torsion bars I started breaking stuff... a lot. I'm doing a SAS (check the custon fab room if you want to see it) but, like Jeremy said, if you're not crawling with it you'll be happy with a mild lift (Calmini).

Zibi 10-14-2010 11:49 AM

Most people at npora, the pathfinder forum, just keep the IFS, but most of them aren't very innovative...largely a buy and bolt on community. Like pathy said, all the ones that do anything serious put solid axles in. He would know to, he's got the nicest pathy I've seen.

Apathy 10-14-2010 11:56 AM

Quote:

Originally Posted by Zibi (Post 1531899)
Most people at npora, the pathfinder forum, just keep the IFS, but most of them aren't very innovative...largely a buy and bolt on community. Like pathy said, all the ones that do anything serious put solid axles in. He would know to, he's got the nicest pathy I've seen.

awe, thanks..[cheers]

its really not that "nice" but it gets the job done pretty well.

dirka dave 10-14-2010 03:14 PM

2 Attachment(s)
Pathy's Nissan...Attachment 133887

Attachment 133888



Stuck on a log.[16]



[cheers]

Apathy 10-15-2010 08:46 AM

Quote:

Originally Posted by dirka dave (Post 1531934)
Pathy's Nissan...Attachment 133887

Attachment 133888



Stuck on a log.[16]



[cheers]

fucker..
i was was slightly impaired.[cheers]

dirka dave 10-15-2010 09:39 AM

Only "slightly" ?

Are you sure about that ?

:D

4skin 10-13-2011 01:01 AM

missed this post that was a fun nite lol

Apathy 10-13-2011 08:05 AM

Quote:

Originally Posted by 4skin (Post 1603681)
missed this post that was a fun nite lol

that log is no longer in the same place.. hahaha lol lol

Half Slant 03-03-2012 06:05 PM



failfinding at it's finest...oh yeah



Punk in Drublic 03-06-2012 05:43 PM

meh hears my station wagon







only had it a couple weeks. took it to lac la hache and green lake. up to sylvester, up to stave. so far its aight. need to get the bronco going.

Hellboy 03-13-2012 03:00 AM

I guess i never posted pics of my pathy...

Nice and shiny when i bought it


After alum rims, new boots, front and rear bumpers, other minor stuff...


How it sits now after the new hood... I got a fender too but i need a bumper and grill first... Do it all at once, at least with the hood on it looks great from drivers seat :D



All times are GMT -7. The time now is 11:16 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.