PDA

View Full Version : toyota talk.. really all its about


g-rod
01-27-2009, 05:17 PM
So i got my 1983, blew the motor, and have a new motor both 22rs... but i want a 22re, now because i know the 22r i have runs fine.. and is free... whats all needed to do the 22re swap onto my 22r... and ive been reading and reading and found that i need a 93 2wd gas tank that bolts in my 83 and the pump will work....


i also want a 5 speed tranny... out of 1st gen the one that will bolt into my truck with no major mods

and also was wondering if anyone has had the problem of there transfer case not staying into low range

AND one more... inside cab roll cages, dirka dave? that ones for you

all this info will be aweeeeeeeesome yo thanks Garet[36]

B
01-27-2009, 05:20 PM
So i got my 1983, blew the motor, and have a new motor both 22rs... but i want a 22re, now because i know the 22r i have runs fine.. and is free... whats all needed to do the 22re swap onto my 22r... and ive been reading and reading and found that i need a 93 2wd gas tank that bolts in my 83 and the pump will work....


i also want a 5 speed tranny... out of 1st gen the one that will bolt into my truck with no major mods

and also was wondering if anyone has had the problem of there transfer case not staying into low range

AND one more... inside cab roll cages, dirka dave? that ones for you

all this info will be aweeeeeeeesome yo thanks Garet[36]



ive got a rebiult 22re with wiring harness 500 bucks

g-rod
01-27-2009, 05:30 PM
woah really whats all been done

g-rod
01-27-2009, 05:39 PM
oh and for that price does tt come with the computer and wireing and fuel pump

B
01-27-2009, 06:30 PM
i bought it for a project all ready rebuilt it does come with wiring harness and comp no fuel pump ... it has been sitting inside for 2 or 3 years since rebiult i payed 500 i only want my money back

Toyquad
01-27-2009, 09:01 PM
popping out of low range... got body lift? if so trim the floor

g-rod
01-27-2009, 09:04 PM
popping out of low range... got body lift? if so trim the floor

i got a body lift.. the floor is trimed.. and i trimmed the stock shifter boots to the point that there isnt much there haha

Redneck_04
01-27-2009, 09:07 PM
some people find it helpful to bend there shifter by putting a kink in it no sure which way to bend it but have seen it done....... someone should know how to bend it?????

dirka dave
01-28-2009, 02:29 PM
I have a 3" body lift and I had to cut out the trans tunell and re-shape my shifter...

dirka dave
01-28-2009, 02:30 PM
Here is a picture of it...



http://www.funinbc.com/forum/attachment.php?attachmentid=83254&stc=1&d=1211920187

Halo
01-28-2009, 05:40 PM
So i got my 1983, blew the motor, and have a new motor both 22rs... but i want a 22re, now because i know the 22r i have runs fine.. and is free...



so...you're going to have a good running 22r that you got for free up for sale then?

g-rod
01-28-2009, 08:10 PM
so...you're going to have a good running 22r that you got for free up for sale then?

yes i am! haha