View Full Version : sas for a 93 f150?

01-22-2009, 08:03 PM
hey guys, lookin into doing a sas on my f150. been told a 79 bronco frt axle will fit, but the steering is another issue. anyone know of any kits or am i just wasting my time with the swap? be honest:confused: :confused: :confused:

01-22-2009, 08:06 PM
go to fullsizebronco.com click forums click solid axle swaps. It will answer every question you have. Great source of info.

01-22-2009, 08:07 PM
[cheers] sweet!! thanx!

01-26-2009, 05:35 PM
Its Super easy to do. I have done it on my budies trucks three times.. Just find an axle 78-79 F150/bronco and get the radius arm brackets to. You can use your stock coil buckets. The track arm needs a little mods. steering works from a really bronco but not the link from the steering box to the main link. you can buy an adjustable one from sport trucks. Get all of the TTB diff out , Mount your radius arm mounts. bolt your track bar on. and your done.HEHEHE... Its not that bad!. And yes lots of info on that site....

02-02-2009, 07:24 PM
i would reccomend bracing your upper track bar bracket at the frame to your engine crossmember. after my swap even being bolted to the bottom and side of frame with 5 grade 8 1/2 bolts it still managed to flex and cause my steering to do funny stuff.

02-02-2009, 07:38 PM
would also beef up the frame the 90's f 150s are notorious for breaking, around the power steering box and the coil buckets.

Ginger Snaps
02-02-2009, 11:25 PM
steering box support use 1/4" plate and buy a 60 spend the money