PDA

View Full Version : 22re into a 1983 with a 22r


g-rod
01-13-2009, 05:01 PM
what is all involved and what needs to be pulled from the truck that has the 22re?

slacker
01-13-2009, 05:23 PM
pretty easy swap .. there is only about 7 wires that need to be addressed .. I say this because , when I did the last one , "customer" wanted the engine light in the dash ..

parts needed are the computer , and engine harness and obviously and engine ... everything else is "bolt up "

http://www.toyotafiberglass.com/images/IM000840.JPG

g-rod
01-13-2009, 05:33 PM
including the tranny or do i use the tranny from the other truck or what?

slacker
01-13-2009, 05:42 PM
it'll bolt up to your stock tranny ... you dont have to move anything .

g-rod
01-13-2009, 07:39 PM
so i need the whole engine wiring and ecu?

nbrowser
01-13-2009, 08:07 PM
ew engine lights !!!!!!!!!!!!

g-rod
01-14-2009, 04:23 PM
what do i need to do for fuel, or fuel tank?

slacker
01-14-2009, 04:56 PM
you can swap in a 89-95 22re 2wd standard cab fuel tank , which is a bolt in affair .. I also supply them brand new (you can see the tank in my trekker build) or just use an external hi volume pump .. I have the part # for an aftermarket one , but it excapes me at the moment .. I didnt like the external pump as there very noisy .. the tank and internals are the best way , but not cheep .

g-rod
01-14-2009, 05:23 PM
whats the part number

g-rod
01-14-2009, 05:23 PM
and would a 85 4 runner tank work

slacker
01-14-2009, 05:36 PM
whats the part number

for what ?

and would a 85 4 runner tank work

NO . it wont fit .

g-rod
01-14-2009, 05:38 PM
the part number for the external fuel pump.. assuming it lets me run everthing stock with the fuel pumpled into the line

slacker
01-14-2009, 06:00 PM
i'll have to dig it out .. >>>>>>>

youngun
01-15-2009, 07:03 PM
msd number 2555 i belive is the pump i have running my 22re with a fuel cell

Nutbar
01-15-2009, 07:09 PM
Edelbrock makes a few external mount pumps now that are VERY quiet, I run their 120 psi high volume pump on my TPI SB Chevy and you have to lean right down beside it to hear it run when the engine is not running, the fuel moving through the lines is louder than the pump.

I like external mount pumps myself much easier to change when they fail

dirka dave
01-16-2009, 02:20 AM
I agree with Nutbar on the external fuel pump.