PDA

View Full Version : FINALLY FIGURED IT OUT


CromeY
11-13-2008, 06:25 PM
so i have been having tones of problem with the new jeep changed a shit load of shit didn't make a difference so i broke down and took it to a shop for a scope 45 min later i kno what it is my fucking intake manifold gasket is broken and part of it got sucked into one of my cylinders and now has a huge vacuum leak they said 460 to fix it so instead went to lordco 10.50 later got the part and start tomorrow night[36] [36] [36] [36] [36] [36] finally i kno exactly what to fix and thank you to everyone who gave me advice on what it might be

Happypants
11-13-2008, 06:28 PM
wow, thats fucked, good to know you fixed it, you gonna get them to do it or you gonna do it?

CromeY
11-13-2008, 07:33 PM
im gonna do it im not paying them 95 bucks a hour its gonna cost the 460 befor taxes for them to do it and the part cost me 10 bucks

Happypants
11-13-2008, 08:04 PM
coo! well get er fixed!

B
11-13-2008, 08:54 PM
don't use the exhaust gasket just the intake one and you should be fine ... be carefull some of those bolt's love to strip and break ...

[cheers]

CromeY
11-13-2008, 08:55 PM
yea then i can finally start the fucking build befor the snow flys and geter done for some snow wheelin[36]

CromeY
11-13-2008, 08:55 PM
the gaskets are 2in 1:dontknow:

nbrowser
11-13-2008, 10:09 PM
Start soaking shit in penetrating oil dude.....it'll be easier in the long run !

Happypants
11-13-2008, 10:52 PM
if you can after you pull all that shit off, take a wire wheel to the studs n shit and then put new locktite on them or they might not stay tight, exhaust bolts are a bitch to wrench on and off and they break easy too, loosen a bit, then tighten a bit, back and forth to keep them from snapping, with lots of penetrating oil

Troy
11-14-2008, 01:28 AM
i dont think anyone can ever figure out the jeep thing...

B
11-14-2008, 01:46 AM
i dont think anyone can ever figure out the jeep thing...




well were still waiting for you and the ford thing .. [f][f][f]...




[22]

CromeY
11-14-2008, 09:48 PM
thanks for the tips got started to night but got way to cold so finish it up tommorow tnx again for the tips

Troy
11-15-2008, 03:11 AM
well were still waiting for you and the ford thing .. [f][f][f]...




[22]

this is true, but wheres your heep chevy thing [22]

dirka dave
11-15-2008, 03:16 AM
well were still waiting for you and the ford thing .. [f][f][f]...




[22]

this is true, but wheres your heep chevy thing [22]


Behahahahahhah.....:s30x:

CromeY
11-15-2008, 05:27 PM
so fixed it today went so smoothly couldn't have been better all the exhaust bolts just fell right off pretty much and i found out why my gasket got fucked i was missing 2 studs so replaced those threw it all together and she just purred man what a difference when ur firing on all cylinders now i can finally start the build[36] [36]

nbrowser
11-15-2008, 07:18 PM
WHOOHOO Cromey.....sounds like ya did some good to that Jeep....good on ya man, saved yerself a whack of cash too.

CromeY
11-15-2008, 11:16 PM
fuck yea saved a shit load and now i kno 100 percent can trust it up on trails now