PDA

View Full Version : rebuildin my first gen atoyoT


Pages : [1] 2

atoyot
11-05-2008, 04:08 PM
well was meaning to do a rebuild sooner or later......since i have owned the truck for 15 years and have enjoyed wheeling and beating it pretty much the whole time i have had her i am the second owner my uncle was the first... been through many different looks and was bons stock when i got her.......

well now its on
fixed the dammage from the roll that week but was thinkin enough of this no power push pull steering under powered 37tsl wantin back on situation.....
so heres what im gonna do... due date mid feb........

hi-steeer and power steering
4.7:1 tcase gears
dual t cases
was gonna 4 link but money n time are a factor so....
64 inch leafs in the rear///maybe track bar
not sure bout the fronts yet maybe s10 or lift springs
extend/remake front shock mounts
extend all brake lines further
new doors
windshield
hoood
lights
real metal bumpers
taken off the box
Truggy rear(roll cage and tubes going to the back along the frame) with dovetail with the box sides bolted back on
grove my 37s and put them back on
new audio so i have tunes!!!!
makin 1/2 doors with my old doors
if money permits beadlocks......
and as for the paint!!!!!!!
gonna keep the tan repaint it in the same colour and ad soem saweeet 80s stripes again!!!
keepin it oldschool

I already bought 2 parts trucks stripped 1 and the other will be next weekend....

I have all my parts 3 t cases lots of axles drive shafts and body pannels!!!!!
getting the hi steer and 4.7:1 tcase gears this or next week......
thinkin i may just try the gears first to see if its enough reduction if not ill get the dual t case adapter and toss it in....
metal for the cage and bumpers will be the weekafter........

then buildy buildy!!!!!!!!
i will do as much as i can with the tools that i have, but will need to pay for some services like final welding and tube bending and such from some frineds......
as for the pixx theres some b4 shots, and the trail that i had t drag my first parts truck down to get it out of the bush......it was far!!!!!
someone stole the front axle after i bought the truck and b4 i had a chace to drag it out...............
/////////so if ur reading this and u recognize the truck and u took my axle hey fuck u!!!!////////////////////////////id come get it if I knew where it was!!!! ///


i will post more pixx as I go
right now just stripping it down and stripping my parts trucks..
getting all my junk together and doing my final planning of the build it will be done by mid feb!!!!!!!

p.s any input is more than welcome!!!!!

Arnee
11-05-2008, 04:27 PM
sounds like a good project. forsure get the dual case adapter, i'm running the ford f 150 shock towers. and if you want do it your self beadlocks i know a guy who sells em for 250 without the hardware

toyon35s
11-05-2008, 04:41 PM
you should by mine and rebuilt it,im the second owner of it,looks to be in a little better shape than yours,its oly a body and frame so would be a perfect start[cheers]

HEAVY METAL
11-05-2008, 04:46 PM
fukin eh bud..let me know when ya need a hand... owe ya soem wrench time...yo

dirka dave
11-05-2008, 04:53 PM
I gots lots of parts....

atoyot
11-05-2008, 04:53 PM
Arnee..... thanx was thinkin the only way im really gonna be happy is with the dual cases..... and as for the f-150 towers i have some but am also thinking of some custom hoops..... thanx for the input....



toyon35s...
thanx for the offer !!!!!! but i want to keep my cab as it will be one of the only pieces left that is og next to the frame n motor.....and for sentemental reasons or just mental reasons i decided i have to keep the og cab in this build
cab isnt to bad doors n stuff are crap...frame is solid n mint and i have mint doors ,fenders,hood,boxsides,glass etc from my donor trucks
but thanx again for the offer!!!!!
if anything changes or i do find some un fixable rust in bad places we may still chat about the frame n stuff....

atoyot
11-05-2008, 05:02 PM
Thanx Dean.....I know I will need to call on buddys for help at some points in this build!!

and Dave...I Like parts..(.dont really need much now)
I also have a bunch (just parted out 2 trucks) and am always game for trades/buyn sellin if theres something u need feel free to ask as well and I will let u know If i need a part........
got front lift springs??? lol

toyon35s
11-05-2008, 05:04 PM
im lookin for some ford shock mounts and happen to have new shock hoops from bcc,may be into a trade :confused0006:

youngun
11-05-2008, 06:26 PM
get some longfeilds and then you can lock up the front.....

kamloopsyota
11-05-2008, 06:56 PM
if yer not 100% sure on cases just run two stock ones, then 4.7s in the future

Redneck_04
11-05-2008, 11:21 PM
i put 4 inch explorer leafs in my runner i moved the perches and it gave me awsome flex and i dont bash my leaves on rocks as much as my bro and he has the chevys......

SHITTY
11-06-2008, 05:22 PM
sweet look forward to see the end project keep updaes and pics . [36]

dirka dave
11-06-2008, 08:28 PM
im lookin for some ford shock mounts and happen to have new shock hoops from bcc,may be into a trade :confused0006:


They are cheap, I bought mine from Ford for $40 each.....

Was a few years ago...:confused0006:

Arnee
11-06-2008, 09:51 PM
They are cheap, I bought mine from Ford for $40 each.....

Was a few years ago...:confused0006:

52.50 for both from coquitlam ford[cheers]

Ginger Snaps
11-06-2008, 10:56 PM
im lookin for some ford shock mounts and happen to have new shock hoops from bcc,may be into a trade :confused0006:


like the mid 80s-early 90s f250s 350s


about 35ish after taxes for both pm me i got 4 in stock at work

Ginger Snaps
11-06-2008, 11:04 PM
oh and wooot woot buddy!!!


glad you didnt post the pic of me standin on it haha

whazhappenin69
11-07-2008, 09:00 PM
Good to see a few first gens around still.......wish I still had one to re-build...

atoyot
12-03-2008, 12:17 PM
well havent been on much been busy buildn n stuff....
but heres some more progress shots...
stripped another 2 trucks.....
got all my hi steer/xover steering ...
got power steering pump and pulleys and res.I PUT THEM IN AND WOW THATS A TIGHT FIT(see pic)
got a 4runner box
got a steering shaft
dual t case adaptor
new prefabbed front leafspring mount
lift springs
all new body pannels/doors/hood etc
new w/s


and a bunch of other goodies....

first pixx are of another truck i stripped.. and the others are of some of the goodies and the power steering goin in then my camnera died
(sorry for the lame pixx been buildn not snappin shots and my cam died ....)
ill take more pixx when the front is all complete... or when i have the 2 tcases together...

THIS FIRST PIC IS A PARTS TRUCK I GOT TO STIP ONLY THING WRONG WAS THE FRAME ROTTEN EVERYTHING ELSE WAS MINT!!!!
IT WAS A NICE SCORE!!!!!

AND THE PIC OF THE 2 AXLES ... 1 SHORT EARLY STYLE /OTHER IS WIDE TRACK big diff in brakes size and looks like 2-3 inches wider..... so might put wide track in as well.. if not ill sell it

T-donk
12-03-2008, 12:29 PM
done yet

Bent Black
12-03-2008, 11:05 PM
who lit the fire under your ass! let me know if i can assist? beadlocks?find me some wheels.

atoyot
05-07-2009, 05:50 PM
well finally go a new computer up n goin so gonna revive this thread
trucks almost done!!!!!!!
just paint and some welding to do!!!!!!
ill post pixx and the specs tonight.........

FZJ80
05-07-2009, 10:31 PM
Will you be selling off any of the unused parts?
I am in need of a few things to use on my BJ60 as well as my 1980 PU.

Arnee
05-07-2009, 10:48 PM
haha thats my buddies truck. he wants that thing outta his garage. build looks good though[36]

dirka dave
05-08-2009, 12:57 AM
lots of new looking parts....

atoyot
05-08-2009, 02:08 PM
well its been a while since i thew up some progress pixx... (comp died)
but heres where shes at now..and the list of mods that got completed.......
everything is in place (power steering box/front leaf hangers) are temp bolted for now until welding time and so i can do as much as i can in my yard and still be able to assemble it get everything where it needs to go test it and fire it up..........
high steer x over steering.....
POWER STEERING!!!! WOOO FUCKIN HOOO!!! turns the 37s like 29s even at idle....
roll bar
new(to this truck) hood
new (to this truck)doors/with vent windows..
straightened most of all the bent metal from dumpin it on its side
new front leaf hanger
moved front axle 1 1/2 inches forward
new ( to this truck)leafsprings
new brakes
new shocks(front)
new transfer case with 4.7:1 gears/awesome reduction but want more)
new(to this truck) drive shafts
brake lines (front)
better cd player n speakers ..... gotta have tunes!!!
Grooved 37 tsls.......(...thanx for letting me use the tire groover buddy!!)
...............................................
..............
.....


and heres the to do list hopefully it will all be done in the next few weeks and a wheelin i will go!!!!!

in the next few weeks/
welding..
cut off un needed or inthe way sheet metal...
install (new to this truck)windshield
repaint truck/ keepin it tan with some sweet sr5 stripes
front bumper
5.29 gears(ordered)
throw some black paint on the chassis
im sure ive missed something.........





and then beadlocks!!!!
ill wheel it b4 i get the beadlocks but they will complete the package....

and i gots lots of spare stuff for this truck so i can beat it break it if it breaks and still afford ti fix it and wheel some more!!!
and sorry for the crapppy pixx ... ill post better progress ones soon....

Honky
05-08-2009, 02:12 PM
Glad you got back online...I thought you were ticked as us

Let me know when you are ready to do another drive up the powerlines!

atoyot
05-08-2009, 02:20 PM
just found these pixx from the flop n break day thaught id toss em up

TWOZEROFOUR
05-08-2009, 08:05 PM
nice work man,, good to see another flop fixx thread [36] [36]

hoser
05-08-2009, 10:45 PM
looks good[36]

just wondering what kind of springs u went with?

dirka dave
05-09-2009, 12:44 AM
looks good[36]

just wondering what kind of springs u went with?



who are you ?


[cheers] :D

atoyot
05-25-2009, 01:42 PM
well doin some of the body now that the doors n hood r on... i just want the lower half of the box to stay attached so i wasnt going for gettin the bodylines all straight n stuff, i actually didnt even put it in the back... just want it to look like a truck as long as it can.....
well some progress and this week ill paint it....

yoda thrills
05-26-2009, 07:11 PM
keep goin man she's lookin good

C-Dog
05-26-2009, 07:18 PM
Is it done yet







































































How bout now



















:hitler: Git er dun happy penis

Toyquad
05-26-2009, 08:10 PM
nice pics, glad to see a 1st gen being saved.





that black and green parts truck looks like one that was posted as stolen on bc4x4:dontknow:

yoda thrills
05-26-2009, 08:19 PM
nope it aint hawt
thats a buddies, had a nissan box with a chewy tribal/flame job...
it looked ugly.
how'd u like buddies custom sun roof....lol

atoyot
05-29-2009, 09:28 AM
well finished as much body work as i felt necessary...... and now it time to make her shiny!!!

painted it yesterday turned out pretty sweet if i do say so my self........
a perfect 30 and 30 (looks mint goin 30 or from 30 ft back)..........



let it dry for another day then ill mask some sweet sr5 stripes on her...
and put all the emblems and morrors on and throw some spray bedinler in the box mmmm box and redo the old shit on the cab floors......



and the she'll be ready for some first scratches!!!!

C-Dog
05-30-2009, 11:58 AM
right on man looking good cant wait to go and beat her again oh yeah

atoyot
06-08-2009, 11:03 AM
WELDING IS DONE!!!!!!!!

THANK YOU MIKEY!!!(37inchdakota)
u did a fuckin awesome job buddy!!!!!!!!!

just some finishing up to do nuts n bolts stuff.... and a front bumper....

roll bar is in and sr5 stripes will be going on this week!!! and thats it i finally get to enjoy my first gen again!!!!!!


but i think today is a good day to go for a drive in her gonna grab a day permit and see how she drives....

Ill snap some better pic too..

Ginger Snaps
06-08-2009, 11:34 AM
awesome swing by the house if you take it out ill be home all day

atoyot
06-08-2009, 09:29 PM
took her for a drive today.....wow drives awesome rippin at 90 k and no wobble!!!!!!!!!!! bumps n stuff dont rip the wheel out of my hand anymore!!! yay!!!
....... and i just had to drive it to see if all my hard work had payed off.....and it did.....


mocked up a nasty bumper but with some bends and boxing i think it might be the right shape.....
...
4.7 gears in the transsfercase are nice crawls half decent but its still lacking power in 2 wheel......(saving $ so i can rebuild my axles when i do the gears)
paint this week(sr5 stripes)
and thinking ill do wheel bearings and brakes were a little noisy so they will get done as well other than the 5.29s(another month or so)
shes done and i cant wait to rip it up again!!!!!!!

Ginger Snaps
06-09-2009, 12:16 AM
awesome bud so happy to see it rollen again

atoyot
06-12-2009, 11:03 PM
just did the front wheel bearings today and cleaned everything up inside...... started the rear brakes (ill finish those tomorrow morning)
and gonna rip eagle this weekend give her a nice test rip...........

cant wait to get wheelin again...

cronic 4x4
06-13-2009, 11:11 AM
Looks awesome....

atoyot
06-17-2009, 12:13 PM
well the test run up eagle worked awesome!!!!!!!!
power steering is sooooo sweet and 4.7 t case gears are very nice!!!!!
rear springs were tooo stiff and the fronts too soft sooooo..



ripped the rear apart yesterday..... and the front today gonna see if i can make the rear softer ..and 1-2 inches lower and the front stiffer and 1-2 inches higher

atoyot
06-27-2009, 10:24 PM
finished the paint off with a couple stripes..

and started the bumper...nice 80s checherplate
since the test rips went so well i can finsh off a coulpe odd n ends

atoyot
07-14-2009, 10:54 AM
well been havin a blast rippin my old yota!!! and now everything is workin and is the way i want it..... i decided to freshen up some other things on the truck..starting with a brake rebuild..


new pads .... hoses... and rebuilt my calipers........

tchevy
07-14-2009, 11:26 AM
That can of wd-40 has had rough life lol.[cheers]

C-Dog
07-14-2009, 11:31 AM
That can of wd-40 has had rough life lol.[cheers]


Have u seen the Toyota :D that WD is prolly the same year

atoyot
12-23-2009, 12:13 PM
well finally got some new skins!!!!!!!!
same size 36x12.50/15
lots of tread........
should make for some better traction in the snow than my old bald 36s

just waiting for the "call" from a certain good buddy!!!!!!..[cheers]
to come on over ...
for some tire grooving to take place then ill toss em on the toy....[5].....

C-Dog
12-23-2009, 12:17 PM
[36] [36] [36] [36] [36]

Gunna be nice wheelin with traction :D



Oh and yer welcrum wheres my finders fee :D

Boobies2 Boobies2 Boobies2 Boobies2 will work

Arnee
12-23-2009, 12:56 PM
if its the friend i think it is. put wash em and put em in your house mine cut waaay better clean and semi warm

shawn_ruley
12-25-2009, 12:34 PM
love the height and stance of your truck...its PERFECT!

yoda thrills
12-25-2009, 05:52 PM
imop i think the front needs to sit a bit higher, either way man, good lookin truck

atoyot
01-22-2010, 10:06 PM
well after buying a fabbed solid mount...my motor mount tearing issues were over UNTIL.... i broke all the bolts off from the motor side.while out on the trail and motor was floffin around again...GAY!!!!!!
after a few days of drillin n picking threads out got everthing cleaned out and ready to reinstall a mount but which one?????


i decided to try trail gears bomb proof ones(THANX B) since they do have some bushing which may stop the bolts from poppin.....
.. and got my new TSLs mounted to my rims and grooved em
THANX MIKEY!!!!!!!!............
now for some night lights!!!!

UU
01-22-2010, 11:15 PM
Ya bringing it on the spudspudspudspudspud ?

atoyot
01-22-2010, 11:45 PM
Ya bringing it on the spudspudspudspudspud ?



HELL YA!!!!!!!

UU
01-22-2010, 11:59 PM
:D maybe you'll get to wheel w/ me

atoyot
01-24-2010, 12:03 AM
[cheers]

atoyot
09-09-2010, 02:51 PM
well been a bit since i posted on this thread trucks been great !!!!

but after my last trip out.. broke some leafs ....... got another couple leaf packs to play with....
a motor mount....so i made a solid mount for the pass side...(thanx for the weld mikey!)the driver is already a trail gear solid mount...
and i need better diff protection..sooooooo got this beefy cover made from a buddy!!


.
.
.

Redneck_04
09-11-2010, 03:19 AM
chain your motor mounts to the frame bu tleave alil slack so when they blow theres just a lil play instead or your fan almost going through your rad! or just chain it tight so it dosent move!

rogasm
09-11-2010, 11:04 AM
motor mounts schmotor mounts...overrated

atoyot
03-15-2011, 09:08 PM
annd broke some leaf springs again/....

so puttin better leafs in (thanx bruceskin)........
everything else (other than dented n torn body pannels) is holding up well!.

..
so gona build a leaf pack with the new springs n make some new shackes
(old ones are bent to hell)..

n ill be good for the weekend...

4skin
03-15-2011, 10:51 PM
140085isnt this the same spring:confused0006:

atoyot
03-15-2011, 11:07 PM
[quote=4skin;isnt this the same spring:confused0006:[/quote]


same side ya...
but that time it didnt bust the mainleaf
... this time it broke a mainleaf

FZJ80
03-17-2011, 10:54 PM
Anti wrap bar would help save your springs, but you prob. already know that.

4skin
03-17-2011, 11:05 PM
so would losing the lift blocks kriss[f]

UU
03-18-2011, 08:27 AM
or sell it


$1.00

Griswold
03-18-2011, 09:01 AM
Git-R=Done dude

atoyot
08-10-2011, 06:31 PM
well shell be alive again in a week or so......
..
. doin 64 inch leaf conversion....on the rear.....
should solve all my spring probs with that..........
..
.
.
pics after muddrags.....
..
.
thats when illl start..

.
.then finally somemore wheelin!!!.
.
..
.
.
.
.
.
.

mini
08-10-2011, 07:50 PM
thata boy kris getter together

dirka dave
08-11-2011, 07:24 AM
Nice.

It will be a few weeks till i get my new bifrs in.

Soon we wheel again. !

4skin
08-12-2011, 12:35 AM
wheel and dirka dont go together

atoyot
08-24-2011, 11:15 AM
ohhhh goodies are a commin!!!!!
just got back from campin goin to pick up my......
new leafs... sliders........winch.............................a nd finally beadlocks.........

if i can stop licking all the parts for a minute ill snap a pic today...............
.
.finally some
wheelin wheelin wheelin...........

should all be on in time for the longweekend..
.
.either way...wheelin wheelin wheelin.
.
.
.

.
.
.
.
.

Bushwack
08-24-2011, 02:09 PM
Will the 4 little squirls move the extra poundage??

atoyot
08-24-2011, 02:27 PM
Will the 4 little squirls move the extra poundage??


i wish squrrels.......that would be extra power!!!!

they are hampsters on wheels spinning.......
and ya they are tough bastards........[36] .
.
.
.
.
.

atoyot
08-24-2011, 06:55 PM
annnnd heres some goodies.....
.
.but
winch wasnt in.........
..hopefully tomorrow.....


buildy buildy......
.
.
.

.
.
.

.

FKN MRK
08-24-2011, 07:27 PM
[36] GIT ER DONE! [cheers]

vajayjay
08-24-2011, 08:05 PM
SWEEEEEEEEEEEEEEEEEEEEEET[36]

glopedawg
08-24-2011, 09:12 PM
Nice sliddy sliders! Those will look nice underneath!

C-Dog
08-24-2011, 11:30 PM
Right on man happy for you and all the new goodies If I was u I would go with the rust look and don't even bother painting them sliders lol it's all ready going to stick out with them new shiny springs

muddyWaters
08-25-2011, 12:40 AM
Nice.... Now lets see them on your rig! [whip] Wheelin time.

atoyot
08-25-2011, 09:45 PM
Right on man happy for you and all the new goodies If I was u I would go with the rust look and don't even bother painting them sliders lol it's all ready going to stick out with them new shiny springs


fuck yeah bud......
rusty but trusty....


ill let nature paint em...in rust... now if only the springs werent soooo shiny!!!!hahahahahaaa

C-Dog
08-25-2011, 11:11 PM
fuck yeah bud......
rusty but trusty....


ill let nature paint em...in rust... now if only the springs werent soooo shiny!!!!hahahahahaaa

Just drag em behind the Caprice for a couple of blocks :dontknow: lol

atoyot
08-26-2011, 11:37 PM
Just drag em behind the Caprice for a couple of blocks :dontknow: lol

hahahahahahhahahahaha nice..............


well i got the rest of the parts today.. and also went with a u bolt flip kit.....

.
.
.
.new shock mounts n
sliders goin on sunday morning!!!!!![36]


and if the rear works well ill get some springs for the front,
and do u bolt flip as well..........
.
.
.
heres a done ,ass shot of the toy........NO MORE LIFT BLICKS!!!!!!!!!
wheelin wheelin wheelin......[36]




.

Bushwack
08-26-2011, 11:45 PM
when are we going to try it out??

atoyot
08-27-2011, 12:12 AM
when are we going to try it out??


sundy....sunday.....sunday..........but shhhhhhhhhhhhhhhhhhhhhhh;)

Bushwack
08-27-2011, 12:14 AM
cant wait for sunday

youngun
08-27-2011, 12:15 AM
looks good, gotta love new parts

C-Dog
08-27-2011, 01:08 AM
hahahahahahhahahahaha nice..............


well i got the rest of the parts today.. and also went with a u bolt flip kit.....

.
.
.
.new shock mounts n
sliders goin on sunday morning!!!!!![36]



and if the rear works well ill get some springs for the front,
and do u bolt flip ass well

















heres a done ,ass shot of the toy........NO MORE LIFT BLICKS!!!!!!!!!
wheelin wheelin wheelin......[36]



Fkn eh mang right on getting rid of those lift blocks is a good thing those leafs are gonna work so much nicer


Oh ya Pave yer driveway all ready lol




.

4skin
08-27-2011, 01:46 AM
isnt it kinda late for sliders bud
should have said you wanted some i have the experienced ones from the runner still lol

Bushwack
08-28-2011, 09:30 AM
Its sunday time to go???

glopedawg
08-28-2011, 01:26 PM
Hey Atoyot, I can't help but like your rear end, it really catches my eye ;-) Haha but it looks killer with the u-bolt flip kit, and are those shocks mounted like that, or are they hanging? And you should get a pair of braided stainless steel brake lines from your center splitter on your axle. And I like what you painted on your rear axle... Hahaha fuck jeeps!

atoyot
09-06-2011, 10:36 PM
thanx.....
shocks werent done yet.
.
.
.
all done now n trail tested...
..
im happy......


just some dents n a tail light to fix ....again...:D

youngun
09-07-2011, 10:49 AM
To bad about the box, probably coulda got some good cash for it before the damage. Looks to be pretty rust free

muddyWaters
09-07-2011, 12:22 PM
Nice to see it getting its excercise! Looks great with the new carnage!

dirka dave
09-07-2011, 12:37 PM
Just a flesh wound. [36]

atoyot
09-07-2011, 11:34 PM
thanx guys.........

..


.


and thanx to mud child.....n gingersnaps.........


the beadlock rings will be here next week!!!!


BEADLOCK TIME!!!!..
.

.

.
.
.

.more to come
..

dirka dave
09-08-2011, 06:18 AM
I am surprised that you have not inboarded your rear shocks.

TWOZEROFOUR
09-08-2011, 08:46 AM
truck looks good man, [36]

atoyot
09-10-2011, 04:08 PM
thanx....
just waitin for my beadlocks......

and dirka the shocks are in alot more than stock....just not touchin in the middle like most.....

.

.
.
.
.wheelin wheelin wheelin......
.
.
.
.
..

glopedawg
09-11-2011, 11:53 AM
Cool truck man. That's too bad for your little flesh wound on the box, that thing is pretty clean. And everything looks functionable now which is good. Good work man, keep it up with that wicked ride.

4skin
09-11-2011, 09:42 PM
Cool truck man. That's too bad for your little flesh wound on the box, that thing is pretty clean. And everything looks functionable now which is good. Good work man, keep it up with that wicked ride.
its a good 100 /40
from a hundred feet doing 40 miles a hour its clean[f]
liquid nails and sprayfoam she"ll be qood as ???????well not new[15]lol
and bead locks will slow ya down from being THAT GUY buddy[cheers]

C-Dog
09-11-2011, 10:19 PM
its a good 100 /40
from a hundred feet doing 40 miles a hour its clean[f]
liquid nails and sprayfoam she"ll be qood as ???????well not new[15]lol
and bead locks will slow ya down from being THAT GUY buddy[cheers]



lol ya they will and after that some OBA would be a great idea for u as well Kris

vajayjay
09-12-2011, 05:08 AM
I'm not that guy anymore[36]
Now my tires stay aired up but my steering breaks all the time:confused0006:

glopedawg
09-12-2011, 09:30 AM
I'm not that guy anymore[36]
Now my tires stay aired up but my steering breaks all the time:confused0006:

Haha why? ever thought of airing down to maybe 12 psi? Haha its a lot better than nothing!

atoyot
09-12-2011, 02:34 PM
lol some OBA would be a great idea for u as well Kris

yes ur right buddy
and got it............:D .................................
picked up compressor today![36]
.
.
pics a commin......[cheers]
..
.
.

.

Happypants
09-12-2011, 06:42 PM
I'm not that guy anymore[36]
Now my tires stay aired up but my steering breaks all the time:confused0006:



now im that guy hahah

atoyot
09-13-2011, 07:17 PM
nice.....
.
.
.
.

. wel the powdercoater couldnt match my paint good enough so sprayed em with the left over paint from the last truck painting....
(still have half gallon)
.
.
.

.now they are an exact match......i think will look good...

.........found a replacement for the torn side wall tsl.......

.............also some thick diff protection.......

..
.
..............and put on a new to the truck manifold so no more exhaust leaks....
.the old one (pic) was screwed....
..

.
.
.
.wheelin wheelin wheelin
.
.
.
.

vajayjay
09-13-2011, 08:55 PM
You mean you have no exhaust leak now:eek:

4skin
09-13-2011, 11:27 PM
no more clacky lol

dirka dave
09-14-2011, 06:21 AM
no header ??

You got to let them squaels breathe man !:D


:vroam: [15]

atoyot
09-17-2011, 12:26 PM
no more clacky........hahahahahahaahah

n ya dave no headder.......
really dont think it would make a difference................

it might take it from 43hp to 44 hahahahahaha.
.
.
.
.
BEADLOCKS DONE!!!!!

THANK YOU MIKEY>>Mr.37inchusedtohaveadakotabutnowhasacruzeron44s

he even made some rings to stop the cone effect the rings seem to have when bolted up...........AWESOME!!!!.
.
.
welded up the old air stem holes n drilled new ones for the 2piece milton valve stems..(thanx for the stems c-doggydogg).

..
.
some shots of the beadlocks n painted rings.....

i think they look saweeeet!!!!

mounting tires today!!!.
.
more pixx to come..

TWOZEROFOUR
09-17-2011, 08:14 PM
nice work on the locks, your gonna love the air/water valves. make sure to throw some spare cores in yer ash try. [36]

C-Dog
09-17-2011, 11:53 PM
Fkn eh buddy !!!!!!!

That's awesome Mr Frey totally rocks that's for sure :D
.
.
.
The locks look KILLLLLL !!!!!!!! and oh man your so gonna love them no bead poppin equals more ground covered faster lol.
.
.
.
.
Well I guess not much faster with the now very very very angry squirrels under the hood that are hating u they aren't gonna move ya faster

Happypants
09-18-2011, 12:23 AM
I got the same rims for my jeep, they look sick with locks on em chris, I'm gonna do mine,

atoyot
09-18-2011, 10:11 AM
thanx guys....


ya i think they are pretty sexy!!!.oh yeah

..here they are all mounted up.... mikeys anti-cone rings worked perfect!!!

even did a little bead cutting on the tsls to let the bead sit better on the rim.....

regrooved the tires as well... now EVERY lug has a groove in it....groooooovy:party0010:





cant wait to try these babies!!!...wheelin wheelin wheelin....[cheers]
.
..

dirka dave
09-18-2011, 10:24 AM
Look killer !

Monday I work on the 82' again.

Been busy with pal this weekend.

4skin
09-18-2011, 10:53 AM
Look killer !

Monday I work on the 82' again.

Been busy with pal this weekend.
shit your gona be allowed guns:run away :run away :run away :run away :run away :run away :run away

youngun
09-18-2011, 12:06 PM
very nice, beadlocks and grooved up now, your going to be blown away the first few trips on those

C-Dog
09-18-2011, 12:32 PM
Right on Buddy they look kill all mounted up the color match on the rings really sets it off :D
.
.
.
.
Wheelin wheelin wheelin is right man can't wait to get out wheeling win ya again buds

Cheese eyes
09-18-2011, 01:13 PM
[cheers]






_____________

Ginger Snaps
09-18-2011, 01:53 PM
looks sick!!!! wheelen when the old lady moves down!!

Hellboy
09-18-2011, 03:27 PM
Will you have to trailer your truck since it has beadlocks? I thought they wern't street legal ?

atoyot
09-18-2011, 08:50 PM
thanx guys.....
n c-dogg......wheelin wheelin wheelin is right!!!!

gonna take em for rips next weekend buddy!!











Will you have to trailer your truck since it has beadlocks? I thought they wern't street legal ?


hahahahaah nope......

i like the fact i can drive her to the trails......
n beat her all day ...
n drive home....with more dents....:D .

.
.
.
..
but on a technical note.....
if the situation did arise........
id say they are decorative rock rings.....;)
.with stylish bolts for effect...
.
.
.
.
.no way of tellin they are unless u dismount the tires...
...
. but im not to worried about the beadlocks.......................


.

atoyot
09-18-2011, 09:15 PM
n a pic of em on the truck......[36]
( i know it looks like not all the lugs are grooved.....they are, I just havent picked the rubber pieces outta the grooves yet....

thanx again mikey for weldin em up for me.............
ur awesome!!![cheers] .

..
.
.

atoyot
09-22-2011, 08:34 PM
well hated the chrome mirrors i kept rippin off in the trails,
so found some nice small black plastic ones n put em on....
should be harder to rip off...
(left pic old mirrors)
(right pic new black mirrors)


also got the air compressor.,got a portable one so it can go in all my trucks....

does a 36x12.50x15 tire
from 4 psi trail pressure to 15 psi street pressure................

timed it at 2 min 24 sec.........and thats just fine with me!!!.

.under 10 mins for all 4........


..
..[36]
.
.
.
wheelin wheelin wheelin
.
.gonna get some new dents this weekend!!!!
..
.
.

.

78bronco
09-23-2011, 01:04 AM
those beed locks look even more sick on the truck!!

4skin
09-23-2011, 10:50 AM
well hated the chrome mirrors i kept rippin off in the trails,
so found some nice small black plastic ones n put em on....
should be harder to rip off...
(left pic old mirrors)
(right pic new black mirrors
..
.
.

.
trees are going to love those new mirrors crunch mmm yumm:D
although the original mirrors survived on the runner till the roll:dontknow:

dirka dave
09-23-2011, 10:55 AM
The stock mirrors are strong !!

They look way better than those ford style old clunkers.

Troy
09-23-2011, 01:39 PM
nice dubz

atoyot
09-26-2011, 03:57 PM
Thanx guys!


well after drivin on the beadlocks this weekend.....

all i can say is i waited wayyyyyyy to long to put em on the truck...



I LOVE EM!!!!!
.
..
.
.

dirka dave
09-26-2011, 04:01 PM
Did you figure out the oil leak ?

UU
09-26-2011, 04:09 PM
dirka la pose [16]

http://www.funinbc.com/forum/attachment.php?attachmentid=146140&stc=1&d=1317072367

atoyot
10-03-2011, 06:44 PM
More posers for UU..............:D

...

atoyot
10-05-2011, 02:12 PM
well i hit my t-case xmember really good.....
bent it back on one side about 2inches.......
an cracked the frame a lil.......

fixin time it seems.....
.



[36]

..

.

4skin
10-05-2011, 11:35 PM
hey you want those rear frame rails????
kinda looks like you gona need em

youngun
10-06-2011, 12:29 AM
ouch, time to flat belly it !!!!

4skin
10-06-2011, 12:37 AM
found the one i have kriss remember now why i changd it
dont know why i kept it:dontknow:
yours is straighter

atoyot
10-24-2011, 12:08 PM
well my leafspring hangers started rippin off the frame n got some good stress/rust cracks..

sooo a lil patchin was in order make her live a lil longer...


Thanx Bushwack for doin the welds!!!!!!!!!!



and after the beating this weekend id say itll hold for a while heheheheh

youngun
10-24-2011, 12:14 PM
im going to go check today for that x member bud..

atoyot
10-24-2011, 12:17 PM
im going to go check today for that x member bud..

thank you!.
.

[cheers]
..
.

youngun
10-25-2011, 01:32 AM
i have 3 x members be none of them are first gen. I must have sold it or scrapped it at some point. Sorry

Pegleg
10-25-2011, 08:43 PM
chevy 63's.....move the leaf mount

Newfie
10-26-2011, 01:36 PM
[stupid] than you can make a better mount than the thin old stamped steel from the factory.

4skin
10-26-2011, 02:20 PM
cut it off forward of the rust in frame and tube it buddy
so start at your front bumper and start building towards the back[f]:D




































































































sorry bud it had to be said better me than a real jeep guy:D

Bushwack
10-26-2011, 02:46 PM
cut it off forward of the rust in frame and tube it buddy
so start at your front bumper and start building towards the back[f]:D




































































































sorry bud it had to be said better me than a real jeep guy:D

Bruce you are a real jeep guy now!!!!

Apathy
10-26-2011, 03:16 PM
well i hit my t-case xmember really good.....
bent it back on one side about 2inches.......
an cracked the frame a lil.......

fixin time it seems.....
.



[36]

..

.

This design is the number 1 thing i don't like about yotas.. that cross member is Fawking stupid.

atoyot
10-27-2011, 09:18 AM
thanx for the input guys....
but not goin 63s she rides n flexes just fine.....
shes gettin rusty so rather than fabbin stuff right now.......
just some patchin..n beatin till spudspudspudspudspud!!!!!
..
.
then shell get some tube frame or new frame action and will become a TRUGGY.....................
.
.
.
.
.and a jer i hate the xmembers too......
..

.

atoyot
11-05-2011, 09:56 PM
ever wonder what i got under the hood for power..........
.
heres a hint

.theres acouple of em and they are annngry!!!!!.
.
.

..
.

..
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
..

..
.
.
.
.

Toyquad
11-05-2011, 10:01 PM
lol the way mines running i think i got 3 1/2 semi retarded squirels under the hood

4skin
11-06-2011, 02:38 AM
my 4 yunner sounded like 3epleptic sqiurels and one normal one with a hammer trying to get out

atoyot
11-23-2011, 04:27 PM
well my front d shaft packed it in.....at the newbie run
the cardon cv is sooo fucked its not even rebuildable......


so i guess all new front shaft is gettin built....
.
.
should have it by thursday

ready for weekend wheelin.
.


..
wheelin wheelin wheelin[36]

dirka dave
11-23-2011, 04:34 PM
See ya tonight !!!!

youngun
11-23-2011, 05:54 PM
well my front d shaft packed it in.....at the newbie run
the cardon cv is sooo fucked its not even rebuildable......


so i guess all new front shaft is gettin built....


That reminds me, i should grease mine:rolleyes:

atoyot
11-25-2011, 07:14 PM
well 290$$$ later................. its ALL new......
.
.
..
ready for wheelin wheelin wheelin this sunday!![36]
.

.
.
.

Toyquad
11-26-2011, 10:59 AM
looks good.....

why not square shaft?

4skin
11-26-2011, 12:09 PM
didnt have a big enough hammer for round peg in square hole

atoyot
11-26-2011, 01:36 PM
looks good.....

why not square shaft?

i hate the square shafts........
..
and with having to get all new stuff minus the the actual shaft i thaught id keep it round... and its all balanced
itss gonna be spinnin good drivin around in 4wd snow wheelin so thaught just do it right.......
.
.
and be done![36] .
.
.

Toyquad
11-26-2011, 02:16 PM
makes sense.

i would have liked to do mine properly but $$ was an issuse so the $40 on metal was the only option

rogasm
11-29-2011, 08:48 PM
wow 290!? my double cardon is fucked too, hope it wont cost me that much. Where did you get it done?

atoyot
12-08-2011, 06:38 PM
wow 290!? my double cardon is fucked too, hope it wont cost me that much. Where did you get it done?
driveline services in delta on 84th.......[36]
he is gooood shit!!!!!!!!!!
id reccomend him!!!!
..
.
.
.
.
.
welll got all new driveshafts now....
.
. since i twisted the rear shaft in two........twice in 1 day[36]
got a new rear driveshaft made (260$ with 2 u joints)
thicker wall tube and a little larger diameter
wayyy stronger than stock....

got 2 perfect fronts now too!!!!!

just need another rear for spare and il have spares for the front and rear......

..(yes they are colour matched to the truck..............:rolleyes: ).
makes the truck wayyy faster
.
.
.:D

Griswold
12-08-2011, 06:54 PM
Cool.........Looks good bud.

FZJ80
12-08-2011, 07:25 PM
$290.00 for the whole shaft? or is that with your old slip-joint? If that's for a complete shaft that's not a bad deal at all!

atoyot
12-08-2011, 07:48 PM
$290.00 for the whole shaft? or is that with your old slip-joint? If that's for a complete shaft that's not a bad deal at all!
yes whole shaft on the front!!!!! everything except the male slip..........





and on the rear....260..
that was with the female part of my old slip-joint replaced ....
the female end was messed up so he replaced that....
-----used my male end.......
re tubed. with thicker wall/larger diameter
..installed 2 new u joints... and balanced
.
........ he does good work and stands by it....



i had one of the caps on the front shaft he built me come off......



had to wheel on it and drive on it to get home....
with the cap missing....



let him know what happened he looked at it and knew it was his fault...something went wrong with the c-clip installation.
the center cv ball got mashed .... and the ear with the cap missing got wrecked drivin on it................

but it wouldnt have gotten wrecked if the cap didnt come off in the first place
...

so he re re-built it for me for free!!!!
gotta like a guy that stands by his work....



he also built my front spare shaft
(needed to be shortened and rear flange changed to the 80 style..
balanced n done 50$$.
.
.
.
.
.next he will be doing the rear shaft in my 78 bronco..
thicker wall as well.....
.
.
.

.
.[36]

toyon35s
12-08-2011, 07:57 PM
he built the front drive shaft i have for an 82 toy,cost me almost 700,but its lengthened and fully rebuilt with new tubing and all [cheers]

hoser
12-08-2011, 08:45 PM
whats the length on your rear driveshaft might have a spare for ya here

atoyot
12-08-2011, 09:04 PM
whats the length on your rear driveshaft might have a spare for ya here
48 1/2
flange to flange......
.
.
.
whatcha got???
...
.
.
.
:D

Griswold
12-08-2011, 09:45 PM
Ya I'm gonna need a front one built if Dad ever gets to spend money on my self instead of the 3 teenage daughters..........

dirka dave
12-08-2011, 09:45 PM
Going to be ready for sunday ??

Bitchezzzzzzzzz

Griswold
12-08-2011, 10:20 PM
Going to be ready for sunday ??

Bitchezzzzzzzzz

I gots two blown axle seals......booooooooooooo
I know what I'm doin Saturday.....

toyon35s
12-09-2011, 12:13 AM
Ya I'm gonna need a front one built if Dad ever gets to spend money on my self instead of the 3 teenage daughters..........

i have one for an 82 good for up to an 8inch lift ,just drill the bolt pattern on your flnges and it will work gooder [cheers]

atoyot
01-14-2012, 08:02 PM
added some offroad lighting............


pixx after they are all wired up...

4skin
01-15-2012, 12:21 AM
added some offroad lighting............


pixx after they are all wired up...
shure more stuff to smash off it
arnt headlites markers and taillites enough:D

atoyot
01-16-2012, 11:11 PM
smashy smashy....
.
.
.
buildy buildy
.
.hahahah
.
..
.
.
.
.doin some spudspudspudspudspud run work on the toy added the lights
grooved the tires even more...
(grooved the lugs in between lugs with alternating _ _
_ _
\ /
_ _
\ /
_ _





cause u cant have too many biting surfaces now can ya....
.
.
as well as hopefully solved my steering knuckle always loose isssue....

.
.thanx mikey!!!![cheers]
..
.

Happypants
01-16-2012, 11:15 PM
hmmmmmm

85chevy
01-16-2012, 11:19 PM
looking good[cheers]

atoyot
02-05-2012, 12:12 AM
thanx..
.
.
.
.
.

.
.n got a coool wheel from the 80s i had kickin around sooo in she went.


all fluids changed tuned up.... tierod ends changed......

.
.
.
.
.
.
.

..

Bent Black
02-05-2012, 09:49 AM
That should make it go faster buddy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![36] [36] [36]

64CJ6Willy
02-05-2012, 09:54 AM
Damn seeing that interior I kinda missed my old 83 for a moment....

But only a moment, it's passed!

vajayjay
02-05-2012, 09:56 AM
Clean up all the garbage :WTF

Newfie
02-23-2012, 09:20 PM
Clean up all the garbage :WTF

If you did that what would cover the rust?:dontknow:

atoyot
03-08-2012, 07:49 PM
just gettin some things ready for rippin this weekend.....[36]
tossed a few more coats of clear on my diff:D
so she keeps lookin gooooood n shiny.......:p
.:rolleyes:
.

.wheelin wheelin wheelin.......

.
.

procircuit
03-08-2012, 08:13 PM
[36] [36] [36]

mini
03-08-2012, 08:14 PM
bahahahhahahahahahahahahahahah

atoyot
06-25-2012, 12:41 PM
well got some demuddin n pannel straightening to do after the pantyremover/cameltrophy run...

not quite time to reskin it yet...
ill pound the pannels a lil more against trees n rocks [36]
b4 i repaint n reskin her this fall...
but did manage to bend a shock.:dontknow: ...so new shocks all around.....:)
.
.
..
.

dirka dave
06-25-2012, 12:51 PM
Looking good buddy.

Like the diff cover.

vajayjay
06-25-2012, 05:30 PM
It's done, throw it away






























And buy a jeep

atoyot
09-16-2012, 06:21 PM
:D well time to put on some new body pannels/fenders n exo........

i wasnt really gonna exo it but one came up i couldnt refuse...



since hoser didnt need his old cage i thaught id use it.....
since i know its been trail tested....haahahahahaa

got some cutting n modding b4 i mount it
maybe even remove my box......
add some tube/and remove some tube....bring the stinger in a bit etc...


heres a couple test fit shots...

just threw the 2 halves on to get an idea of what it will look like.....

might even keep the rear roof part:dontknow:
fits nice~rice





now i wont have to baby it so much:rolleyes: ......

.
.
.

78bronco
09-18-2012, 01:58 AM
looks good !!!

vajayjay
09-18-2012, 05:15 AM
What do you need an exo for? :D

hoser
09-18-2012, 08:27 AM
dammm not bad a few changes and it should work great

Murd0c
09-18-2012, 10:30 AM
Talk about a nice score, think about how bad you will be beating on her now lol

Happypants
09-18-2012, 10:40 AM
U finally gonna use thoes fenders I bought u? 4 or 5 years ago lol

Looks like a good fit [36]

4skin
09-18-2012, 02:49 PM
shouldnt this thread be rerebuilding my atoyot

TWOZEROFOUR
09-18-2012, 04:11 PM
Jungle Jim [36]

atoyot
11-03-2012, 11:37 PM
i like that "jungle gym" hhhahaah

.
.anyways lil work on her b4 the cage is welded on
..
new belts
hoses
waterpump
smaller steering pump pulley/pumps more fluid at low rpm..
thermostat
idler pulley bearing

.
.next lil wheelin,,, then fresh body pannels n paint.

.
.
.

atoyot
11-05-2012, 07:07 PM
gettin ready to put the exo on, gotta swap some body pannels
denty hood fenders n grill all off.................... doors off............
lights etc out........................
pixx tomorrow to dark now...

BC_4RUNNER
11-06-2012, 08:08 PM
Damn your stripping her good this time. Tell me the cage is going TRD tan as well.

vajayjay
11-06-2012, 08:16 PM
Is it rebuilt yet?

4skin
11-06-2012, 08:43 PM
Done yet

atoyot
11-08-2012, 01:00 AM
.
.[bacon]
.
.

..

vajayjay
11-08-2012, 05:29 AM
It looks better already:D

mini
11-08-2012, 10:56 AM
get on with your own build JJ

lookin good kris

procircuit
11-08-2012, 11:22 AM
fuk ya dood!! give er hell!

vajayjay
11-08-2012, 09:19 PM
get on with your own build JJ

lookin good kris


Who's this guy :dontknow:

Happypants
11-08-2012, 09:20 PM
Finally gonna use thoes fenders eh? lol

atoyot
11-08-2012, 11:48 PM
Finally gonna use thoes fenders eh? lol

yup;) ......


.
.fixed up some dents n cut the new fenders to clear the tires n cage.....

then gave em a strip down,,,,,,
n a few coats of fresh toyota tan.......inside n out....

.
.
.
.

.
.

Hellboy
11-09-2012, 12:15 AM
I see you axed the box lol

looks cool new fenders r shiny

procircuit
11-09-2012, 08:09 AM
minty !

C-Dog
11-09-2012, 09:11 AM
Just like rolling off the showroom floor :D can't wait to rip around in here again with ya bud

mini
11-09-2012, 10:50 AM
Who's this guy :dontknow:

Just another random weirdo

C-Dog
11-09-2012, 02:20 PM
Just another random weirdo



Funny I was thinking the same thing :dontknow: lol

atoyot
11-10-2012, 10:51 PM
hood and fenders done... all inners etc done......
swapppin door stuff n painting doors next......


fuck the box is hammered think it might have to go...
..

..
.gettin closer to weldin the exo cage on....[36] .

..
.

.

C-Dog
11-10-2012, 11:56 PM
Right on buddy that's freaking awesome man :D
.
.
.
.
I like the box cut like that look good u leaving that way or gonna make something up ?
.

.

Or get the EXO on and then build storage inside the cage I the back kind thing ?
.
.

.
lol so awesome that its gonna be all new again and u get to dent it up all over :D

procircuit
11-11-2012, 08:53 AM
Smashy smashy fixey fixey... Fuk ya[36]

Griswold
11-11-2012, 11:14 AM
Kewl kewl Looooking goood mang.

BC_4RUNNER
11-11-2012, 11:18 AM
Looking really good Kris. If you need a hand this week let me know.

atoyot
11-11-2012, 10:05 PM
thanx guys......
shes cleanin up real nice.....
takin some time to clean her up n fix lil holes paint inners etc etc
no more liquid nails n patchin.patches...
just thaught it was time to. give her a good goin over b4 the cage
then more beatings...[36]

even got a lil idea to add more seating:)


..
.

.
.

thinkin maybe somethin like this for the stripes this time...
.
..
.
.
.
..

atoyot
11-11-2012, 10:06 PM
Or get the EXO on and then build storage inside the cage I the back kind thing ? :D
i like that idea bud![cheers]

jordanbennett
11-12-2012, 10:33 AM
noice!!

Chopstick
11-12-2012, 04:51 PM
I heard someone say that his Toyota beats everything else (jeeps) and doesn't need to be fixed or rebuilt hmm

atoyot
11-13-2012, 11:59 PM
I heard someone say that his Toyota beats everything else (jeeps) and doesn't need to be fixed or rebuilt hmm


its all cosmetic this round ...:rolleyes: ........Rice

since the mechanical has been great over the years..
im .just makin her look pretty again..........
but pretty doesnt last long with the places i like to wheel[36] [36]
so hopefully the exo solves that problem........
..
.
.
.


.
.
.

.

atoyot
11-14-2012, 12:12 AM
the new to the truck doors are stripped of everything n sprayed.........
once the paint fully dries they will get re assembled n tossed on....
..
.
put the front fenders back on and the grill n everything back in... im glad i stripped it down n painted it inside n out
it really cleaned it up nicley...........
..
.exo is even closer to goin on now.....


.
..

Nutbar
11-14-2012, 10:00 AM
Hey, where's the winch . . . I ain't pullin your stuck ass all the way through a trail again LOL

4skin
11-14-2012, 10:32 AM
It will be more fun next time more places to hook to lol

hoser
11-14-2012, 06:02 PM
holy fack u gettin er ready for the next show & shine.......

lookin good[36]

Murd0c
11-14-2012, 06:51 PM
looks fucken killer, I gotta stop by soon to check it out [5][5][5][5][5][5]

T 'n' A Barbie
11-14-2012, 06:53 PM
Fenders look good :)

atoyot
11-18-2012, 10:07 AM
Hey, where's the winch . . . I ain't pullin your stuck ass all the way through a trail again LOL

ya i had a fun day too buddy!!!!!!![36] [36] [36] [cheers] :D
.
.
.
.n winch will go on after the cage is done....:)

..
.
.

atoyot
11-18-2012, 10:17 AM
well this cold sux for painting... paint takin forever to fully cure so doin what i can.....
doors all done still drying.....
hood back on and laid the first stripe down...the sr5 stripes will take time waitin for layers to dry...
but the design i came up with i think will look awesome all done
goin with the same 80s yello brown black....
.
.
..and ya theres a couple dings n stuff in the new pannels .made em nice not perfect
cause its still gonna get used
cant get to fussy with perfect straight pannels
they will be dented up again...
.
its a 30/30.....30kmh or 30ft away she will look minty..hahaaahaah
.
.
.
.
.
..
.
.
n cage gonna be goin on today[36]
.
.
.

..

BC_4RUNNER
11-18-2012, 11:14 AM
If you need a hand getting the cage lifted on just give me a call.

4skin
11-18-2012, 07:08 PM
You should bring the winch so we can build the mount for it

procircuit
11-18-2012, 07:20 PM
Sweet!

jordanbennett
11-18-2012, 07:29 PM
Fuck yeah

BC_4RUNNER
11-18-2012, 09:47 PM
Oh just wait............

atoyot
11-18-2012, 09:52 PM
You should bring the winch so we can build the mount for it
good thinkin./.....
.

..
.

.


so got the 2 half cages back into one cage......... and on the truck n tacked into position......

fits like a fuckin glove!!!!!Rice

.
.
.next is to make all the mounts .... and add / delete tube........
bunch of work to do still....
.
thanks brucey....n gregrunner the extra set of hands was much needed........
.
.
.kinda looks funny with the fresh front end on n old doors n box.....:rolleyes: .
but theres lots of room so i can change doors after.....

..
.

.
.
.
.
.
.
.
.

BC_4RUNNER
11-18-2012, 09:59 PM
There it is.

I still can't believe how well it fits considering what it came off and what it's going on. I can help with anything else that needs doing this week.

4skin
11-18-2012, 11:04 PM
Yea quite surprising it fits anything knowing how both trucks lived life
Lol and 2nd the thanks of help to gregrunner

C-Dog
11-19-2012, 12:25 AM
Fawken Eh looks kill :D


This might just be the last set of fenders she gets eh lol can't wait to bash some trees in her with ya bud

vajayjay
11-19-2012, 05:20 AM
You know I live 2 mins away :D

procircuit
11-19-2012, 08:21 AM
Fits Nice!

hoser
11-19-2012, 08:32 AM
looking good[cheers]

4skin
11-20-2012, 12:24 AM
Now has parts from 2 4runners that are no more
So taken three trashed trucks to fix one lol

atoyot
11-20-2012, 01:43 AM
cut,weld repeat....
.














[36]
.
.

Chopstick
11-20-2012, 02:36 AM
Looks pretty sweet!

stockwheels
11-20-2012, 06:54 AM
Sweet its looking good

Murd0c
11-20-2012, 09:09 AM
Just think how much you will be able to beat on it now :D

Happypants
11-20-2012, 09:11 AM
I'm glad your finally using the fenders I bought u, from what..5...6 years ago lol

dirka dave
11-20-2012, 10:03 AM
I'm glad your finally using the fenders I bought u, from what..5...6 years ago lol

Ya from when you drove into him.

yoda604
11-20-2012, 10:16 AM
Looking good dude[cheers]