PDA

View Full Version : 86 300-6


Reeseman
10-26-2008, 11:41 AM
I am looking to rebuild a 300-6 for my bronco. Anyone got a carbed one kicking around. I love those engines.

radman
10-26-2008, 02:09 PM
i have a efi one, but ya 300s rock

Dr.Ford
10-26-2008, 06:43 PM
i have a efi one, but ya 300s rock
how much you want for it if Reeseman dosent want it

Reeseman
10-26-2008, 07:07 PM
i have a efi one, but ya 300s rock
That is a bit far to go for it. How much. Is it compleat?

patford
10-27-2008, 10:16 AM
Got one with 4bl intake and mild cam in Chilliwack

radman
10-28-2008, 12:38 PM
it's a little tired, 327,000km but its in my dd rite now, it will be complete minus wire harness, lower intake, exost manifolds, and ill need the distributor if i dont buy a new one $250 i was going to keep it arround incase the new one dosent work out, but i could use the $

Sonofx51
10-28-2008, 06:11 PM
which intake does it have a clifford or a offy? you wouldnt want to part with it, would you?

I've been looking for an offy for while now.

Reeseman
10-28-2008, 06:27 PM
Thanks but I was looking for a carbed one to rebuild

patford
10-28-2008, 07:57 PM
Offly in take dont want to part out

Sonofx51
10-29-2008, 12:38 AM
hehe no worries.. thought i would ask

HEAVY METAL
10-29-2008, 07:04 AM
check craigslist a buddy of mine picked up a mint one with tranny and transfer for 500

Sonofx51
10-29-2008, 05:43 PM
i've been trying... i've been looking on craigslist from victoria as far east as Ontario....

Reeseman
10-29-2008, 09:14 PM
The one I have now is still ok but I want to build one to drop in.

4linkfota
11-15-2008, 12:42 PM
I got one carbed in good shape in Kelowna.

Reeseman
11-18-2008, 03:32 PM
I got one carbed in good shape in Kelowna.
how much?:confused0006:

jonny6door
11-18-2008, 05:24 PM
which intake does it have a clifford or a offy? you wouldnt want to part with it, would you?

I've been looking for an offy for while now.

Sorry about hijacking the thread but...

there always on ebay....


http://cgi.ebay.com/ebaymotors/ford-300-six-offenhauser-intake-360o-dual-port_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a 2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem220310556480QQitemZ22031055648 0QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories



http://cgi.ebay.com/ebaymotors/New-Offenhauser-4V-Intake-Manifold-Ford-240-300-I6_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQ itemZ280265512900QQptZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories
________
Penny Stocks To Watch (http://pennystockpicks.net/)

rockycotton
11-18-2008, 05:40 PM
Thats what I have in my other rig ... great motor very tough ... I check and see if I have any left over around my buddy's house ... mine are double 3 and 3... will that work .. :cool:

Reeseman
11-19-2008, 03:17 PM
Thats what I have in my other rig ... great motor very tough ... I check and see if I have any left over around my buddy's house ... mine are double 3 and 3... will that work .. :cool:
I want to rebuild one for my bronco.

rockycotton
11-19-2008, 04:00 PM
you want to rebuild , not jusy the exhaust ... you are going with carbs right .. or injection .. i had my old block hmmm wonder if it is still there .. i will take a look tomorrow , thursday ..

Reeseman
11-19-2008, 04:55 PM
I am carbed

rockycotton
11-22-2008, 08:14 AM
I checked , looks like buddy sent it off to scrap , sorry dude :cool:

rockycotton
11-22-2008, 08:15 AM
There is post in here of a guy selling whole truck in vernon , 1000 bucks ..

rockycotton
11-22-2008, 08:17 AM
http://www.funinbc.com/forum/showthread.php?t=94101

Reeseman
11-22-2008, 06:18 PM
I don't need a hole truck. just an engine. Mine is still strong.

Daveforded
11-22-2008, 07:58 PM
not to be an ass but what is so great about the 300's ive had the 351w and loved it have a 302 now and it blows balls....so just courious.

FU Toolbag
11-22-2008, 08:13 PM
inline 6, not high hp or revs, but torque like mad.

Trooper
11-22-2008, 08:18 PM
straight sixs are smooth as hell too and seem to last a real long time. Tourque monsters

Daveforded
11-22-2008, 08:26 PM
that makes sense thanks.

jwstevens
11-23-2008, 12:13 AM
I have an assembled rebuilt block (crank, rods, pistons, etc) and fully rebuilt head (everything new) for sale for $300. They aren't assembled together. Professionally built in a machine shop but never sold and shop has since shut down. It is located in Penticton but could be delivery could be worked out.

PM me or better yet call Pat 250.492.5192

4linkfota
11-23-2008, 07:37 PM
Ill take 200 bucks for it or trade for a decent NP208.

whazhappenin69
11-24-2008, 10:22 AM
As far as ford motors go I love my 300-6 FI. It's not a power house on the highway but has lots of torque, best of all is great on fuel. Mine is dual fuel and at around 60cents a litre for propane it's cheap as hell to run as a dd.
Good luck with the build.

Reeseman
11-24-2008, 07:48 PM
not to be an ass but what is so great about the 300's ive had the 351w and loved it have a 302 now and it blows balls....so just courious.
Ti was the best engine ever made. Come wheel with me I will show you. Best engine ford ever made.