View Full Version : Diesel upgrades --where?

10-22-2008, 12:36 PM
Going to be putting in a mild chip, cold air intake and exhaust. Nothing crazy jus trying to get the truck to breather better.

On the last trip north we had two diesel’s towing trailers. Mine stock was getting 24L to 100km while the truck with the above mods was getting around 14L per 100km

Where would you guys recommend getting the work done? Was going to get “Edge with attitude” chip. Is there something better?

10-22-2008, 12:47 PM
mopac is always a choice prolly stock and good selections too

i would recomend a adjustable system myself

something like bullydog that has more than one setting [cheers]

10-22-2008, 12:52 PM
Go big or go home............

Ginger Snaps
10-22-2008, 12:55 PM
pdr in portkels, bd in abby... both do good work

10-22-2008, 12:55 PM

10-22-2008, 12:57 PM
oh and before i forget

fix yer fawkin jeep 1st

10-22-2008, 01:50 PM
going to start on it this Sunday

10-22-2008, 01:52 PM
No chip but Cold air and straight pipe and 35's I get 19+ MPG.[36]

dirka dave
10-22-2008, 01:52 PM
My brother in law has a "6 shooter" in his dodge....

loves it..

10-22-2008, 04:08 PM
i like the edge w attitude myself and the heads up display is nice so u don't have to add a bunch of other gauges at more expense egt's and boost and a must have to play with out hurting things ... aem make a really nice cold air and magnaflow has a stainless muffler kit thats very reasonable for what you get all avilible locally

what i would of done if mine didn't come with it all allready ...

10-22-2008, 06:51 PM
BD diesel performance in Abby

10-22-2008, 06:56 PM
preadtor diablo and power puck... you will love it

10-22-2008, 09:39 PM
Mines got a fixed 45hp chip,aem stage 2 cold air intake and straightpipe exhaust,breathes good on the coq towing the 26ft toyhauler,it gets 15.9ltrs per 100 with 35inch tires

10-22-2008, 11:34 PM
I say get a proper intake made. Lots of CAI's for trucks are not really intended for the application, theyre just made to fit a whole bunch of different trucks.

10-23-2008, 09:55 AM
Jazzy Diesel in abby......

10-23-2008, 10:37 AM
I have a call into Jazzy waiting for them to call me back with a quote

10-23-2008, 11:48 AM
I would go to BD in Abby for sure

10-23-2008, 11:53 AM
the head machanic from BD started Jazzy diesel with brian because he was tired of there bull shit there....I delt with BD for years now i go to Jazzy:dontknow: good place.....[cheers]

10-23-2008, 11:21 PM
CAI is the only mod I have on my '07 with the six speed manual and I average 15 city and 20 highway according to the readout.

10-25-2008, 01:20 PM
I did the exhaust. bigger intake a 4" down pipe on my toyota. Im getting 9L/100 before was 12. Towning I use about a 1/3rd less fuel. My egts weny way way down too.

11-22-2008, 09:41 PM
Id use the smarty programmer if your truck is a dodge its got

CaTCHER software's inside

Ten different performance levels

Fastest download in the industry, a typical ECM update takes
less than two minutes

ABS tire height updates in just seconds

Not traceable in the stock setting. Smarty leaves no footprint

Cold weather 3 Cylinder High Idle is enabled in all softwares

Reads Diagnostic Trouble Codes in plain text

No tools required, no fuses to pull

USB built in for simple updates

Most complete keyboard in the industry

Reliable, it works off your OEM hardware

Programmable Speed Limiter from 25 to 250 mph
Its also stackable so if you want to add another chip on top of it for insane horse power
check it out http://www.madselectronics.com/Smarty03.html

11-22-2008, 09:55 PM
go to either Jazzy in abby OR i have a customer in the wack called TPS (troyan performance specialties) he specializez in diesle performance he was the heas tranny builder at BD and got tired of there crap over there. i would not recomed BD as there prices are way outta wack over there