PDA

View Full Version : sloppy pinion


Bigsexy
10-18-2008, 01:14 PM
how would u fix a sloppy pinion on a 8.8 w/456s? wat parts would be worn out? do u need to re-shim the rear or can u just replace the bearing or w/e it is and retighten?

thanks [cheers]

dirka dave
10-18-2008, 01:17 PM
Open diff ? :dontknow:

Bigsexy
10-18-2008, 01:27 PM
its gota welded carrier..

In The Zone
10-18-2008, 01:51 PM
crush sleeve on the pinion is fukered need to replace as well as bearing....

you might get away with retorqe but I doubt it
and yes you will need to set up the gears...

crazylike
10-18-2008, 01:53 PM
you will have to change the BEARING AND CRUSH SLEAVE AND NUT don't just try to do the bearing and reuse the old nut your just asking for trouble if you do.