PDA

View Full Version : 3.slo wiring?


epic3
09-22-2008, 04:47 PM
Who here can tell me what the pinout is on the ignition igniter next to the coil on a 90 or so runner
I got black with red as ignition input black with white as negative coil output and a black I think is ground but nothin for signal to confirm that and a black yellow and black blue I'm unaware of.
The truck has no spark I know to check the obvious I'm tryin to figure if my pickup in the dizzy is giving anything to the ignitor.

epic3
09-22-2008, 06:14 PM
anyone?

Ironman
09-22-2008, 06:19 PM
hold it to your toungue and turn it on

epic3
09-22-2008, 06:50 PM
hold it to your toungue and turn it on

well duuhhhhh I did that
thats how you check for spark in the first place dumbass

Ironman
09-22-2008, 07:09 PM
try licking a 220 volt plug first to make sure your toungue is working ok

epic3
09-22-2008, 07:18 PM
try licking a 220 volt plug first to make sure your toungue is working ok

I have my tongue calibrated regularily its fine

And so is the toyota now

dirka dave
09-23-2008, 11:28 PM
Tach. maybe....

BC_4RUNNER
09-24-2008, 12:53 AM
I have my tongue calibrated regularily its fine

And so is the toyota now


Huh? You have a toyota now? :dontknow: