PDA

View Full Version : Exhaust for a 7.3 PSD


longhorn
08-25-2008, 09:51 PM
I have a 94 and a 02 Powerstroke.
I want to put a straight pipe on both of them
I cant find a shop around here that will do a 4 inch.
Can anyone recomend a good place to take them either in Kamloops or Chilliwack/Abby ?

epic3
08-26-2008, 11:01 AM
4 inch all the way is huge I think you'll have problems finding anybody to do that.
Are you doing duals?

radman
08-26-2008, 11:07 AM
personally i would stay with the 3" on the 94 take out the cat and mufler and get a round down pipe, the teck at banks said the factory system flows good untill you start changing turbos and injectors. check out BD in abby. 1-888-841-8884, they put a 4" in a friend's dodge for about $800 i think. i got my down pipe from them.

g-rod
08-26-2008, 06:38 PM
hahah my brother straight piped his 95 powerstroker for 150 bucks, including a tip, all 4 inch, acutally everyone of my buddys with a diesel is all 4 inch straight piped minute muffler in vernon will do it

longhorn
08-26-2008, 09:03 PM
Ive seen 4" all the way with no muffler.
One pipe.
It sounded good and seemed to help with the power?
Maybe ill try my 94 first and see if i like it or not.
grod Im going to phone MM in the morning.....thks.

radman
08-27-2008, 12:34 PM
the turbo takes out some of the drone, get a 5" tip welded on.

surreysinner
08-28-2008, 01:31 AM
Dont forget to cut the cat too, its make a noticable difference.

CromeY
09-01-2008, 03:05 PM
in kelowna thers a shop thats does 4 and 5 inch