PDA

View Full Version : Vibration


CheckinOut
07-15-2008, 08:52 AM
I recently took out a 3inch lift to put in a 6" and install 35's tires... but now I seem to have vibration. Has anyone else had this issue?

Tha_Stepside
07-15-2008, 09:27 AM
could be your slipjoint, or your pinion angle could be off. Did you install tapered rear blocks, or did you do a suspension lift?

CheckinOut
07-15-2008, 09:39 AM
it is a skyjacker suspension lift.

Josh_M
07-15-2008, 01:38 PM
Are you tires balanced ?

DeeDee
07-15-2008, 02:27 PM
could be a few things...

But most girls like vibration so what are u complaining about :D

:party0010: :party0010: :party0010:

Tha_Stepside
07-15-2008, 03:49 PM
it is a skyjacker suspension lift.

What I was asking was did you lift the rear with tapered blocks or lift springs?

Kinslayer
07-15-2008, 03:57 PM
Probably unbalanced tires..

What type of truck?

Jeepnut
07-15-2008, 04:46 PM
could be a few things...

But most girls like vibration so what are u complaining about :D

:party0010: :party0010: :party0010:



BzzzzzzzzzzzzzzzzzzzBzzzzzzzzzzzzzzzBzzzzzzzzzzzzz BzzzzzzzzzzzzzBzzzzzzz
BzzzzzzzzzzzzzzzzzBzzzzzzzzzzzzzzzzBzzzzzzzzzzzzzz BzzzzzzzzzzzzzzzBzzzz
:D

ray
07-15-2008, 04:57 PM
tire balance is off


if u just put on ther 35s without doign anything your tirees are outa wack

if u still got vibration
'check diff angle and then

slip joint for extra play

if none of that does anything

look for a separated tire or wheelbearing

CheckinOut
07-15-2008, 06:32 PM
i love the vibration, in between my legs.........not in my truck! lOl [1c]

yeah i balanced the tires after I installed them. I think they are okay!
lift springs were used, and it is a 2006 dodge ram 1500.

I have day off tomorrow to drink a few and get under my beast. I will check the diffangle and slipjoint. After that, i will be back here askin 4 more help...

Could it be the CV's? OR would that not cause vibration?

Kinslayer
07-15-2008, 08:07 PM
What type of tires are they? bias ply's don't balance that well and are pretty rough as it is.. maybe you should try slapping on your old tires for a spin around the block eh?

CheckinOut
07-15-2008, 08:38 PM
that is what i was thinkin. I'll switch to my old tires an see if it helps first before I start in with the other checks....

CheckinOut
07-16-2008, 08:47 PM
took the tires off today and put on my old 33's. the vibration has stopped. or it had when i took it out for a quick spin. it was either the tires or the balancing was CRAP...
i will put the 35's back on the weekend and see if it returns.

thanks for the help.[cheers]

Kinslayer
07-17-2008, 09:23 AM
What tires are the 35s?

dirka dave
07-17-2008, 12:15 PM
Could be u-joint or poor drive shaft angle..

Styx
08-20-2008, 08:48 PM
What speeds dose the vibesa happen at and is it in the steering wheel or the seat...
Is the rear drive shaft a one piece or a 2 piece???


I know so many questions...
Where did you get the tires ballanced and what type of tires are they???
I put Trxus MT on my Ex and they don't ballance worth shiot I'm going to have to bag them... (sand bags internal it's a big rig thing)
Cheers and welcome to the site (better late than never)[cheers]

Metal Mulisha
08-25-2008, 09:29 PM
:mad0215: Its a dodge.....thats the problem.

redneckjim
09-01-2008, 04:28 PM
if u drink alot u wont notice it

Rye Guy
09-01-2008, 09:09 PM
Nah drinkin' and drivin's for sucka's. Smok'em peace pipe![stoned]

crazylike
09-02-2008, 08:59 AM
if your gonna try to see if it is the tires or not i would think you should be trying with a diffrent set of 35's instead of going down to a 33 which works. as this will tell you if it is tires or mechanical eg pinion angle etc. as all that will change with the 2 inch diffrence in tire size.

CheckinOut
09-02-2008, 03:03 PM
thx for all the suggestions. I got it sorted when i put the 35s back on an had them alligned properly. crappy place i got the orignal tires from musta been sleepin when they did the first allignment.

AND
there is no benifit to the vibration if i drink tooooo much..numbs the sences! lol