PDA

View Full Version : starter removal 91 s10 blazer 4.3


fishhead
07-14-2008, 06:27 PM
so my buddy cant figure out how to remove his started in his truck , i took a look at it and it looks like you have to pull the bracket that the front diff sits on and lower the ront diff. am i corect ehohas had to change theres???


any help would be muchly apreciated as i dont wanna work on this thing

rmiller026
07-14-2008, 08:54 PM
haynes manual tells u everything you will ever need to kno

theborges
07-14-2008, 08:58 PM
i can look it up in my manual and tell ya. PM me with your # and ill call ya about it

dub
07-15-2008, 02:26 AM
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528003d507 this site has tons of info for most vehicles
cheers[cheers]
winston

Pegleg
07-16-2008, 04:26 PM
on my 94 4.3 its 3 bolts and drops straight down mine seemed fairly easy compared to my toy 3.0 starter...lol

SquirreL-E
07-16-2008, 06:18 PM
my 4.3 is just 2 bolts, and it drops out like nothin...? nothin to it?

theborges
07-16-2008, 09:20 PM
yeah i just looked at mine and its 3 bolts and will fall right out

fishhead
07-20-2008, 05:34 PM
ya finally got the started it it wasnt just 2-3 bolts had to move some other stuff, new starter in and it satill doesnt help, and the alt is smoking when you hirt thwe ignition, any suggestions

nebowe
07-20-2008, 06:47 PM
make sure the ground straps on the engine are all good...then unplug the alternator and try again....lastly buy a alternator rebuild kit...put in the rectifier bridge (you probably fried it )..and drive it like ya stole it

Hicksy
07-26-2008, 02:06 PM
Loose ground for sure.