PDA

View Full Version : High Steering


Chopstick
07-01-2008, 11:02 PM
hey, i have a d44 out of a 81 FSJ with flat top nuckles... just wondering where i can get high steering for it, i want to get "cross over" steering

http://www.pirate4x4.com/tech/billavista/Steering/Steering_Research/steeringresearch.htm

like in the first pic or the 4th pic?

anything in canada or do i have to go to the states?

thanks

Happypants
07-01-2008, 11:35 PM
any 4wd shop can order it in for you, phil at tdd can make em for ya,

Kinslayer
07-01-2008, 11:35 PM
hey, i have a d44 out of a 81 FSJ with flat top nuckles... just wondering where i can get high steering for it, i want to get "cross over" steering

http://www.pirate4x4.com/tech/billavista/Steering/Steering_Research/steeringresearch.htm

like in the first pic or the 4th pic?

anything in canada or do i have to go to the states?

thanks

Hey Aaron, I have a d44 crossover steering arm at my shop...

It's pretty much identical to the 2nd from the left.. (add a hole at the tip though..)

http://www.rockcrawler.com/features/newsshorts/07october/mad4wd_44arms.jpg

Mr Vic
07-02-2008, 12:20 PM
phil at TDD built my cross over sterring setup, it is super strong. chevy 1ton TRE ends. He made a 3" raised steering arm for my application and can do other types of arms.

here is a picture

http://img55.imageshack.us/img55/9/jeep011sa7.jpg

brothergrimms
07-02-2008, 12:34 PM
you can go to www.northwestfab.com (http://www.northwestfab.com) or here www.ottmachine.ca (http://www.ottmachine.ca) and here too www.evolutionmachine.com (http://www.evolutionmachine.com) these are canadain companys

Jeep Victim
07-02-2008, 12:49 PM
Phil at TDD in Chilliwack can build anything and he wheels his Jeep alot,check him out!

Chopstick
07-02-2008, 07:48 PM
ok, thanks for the help guys