PDA

View Full Version : Identifying Parts


Tehaids
06-19-2008, 04:08 PM
Is there a quick way to identify the transmission, transfer case, axles in my truck? Something from the VIN, or stamped into the castings?

factor
06-19-2008, 04:14 PM
the quickest way is to look under your truck
if ya cant figger it out call the dealer with the vin and they will tell ya

crazylike
06-19-2008, 04:35 PM
the tranny will have a number on the side just above the tranny pan the t-case should have a tag on the back side close to the filler hole and the axels are probably a D44 front and a D60 semi floating or a 9 3/4

Tehaids
06-19-2008, 04:41 PM
Thanks for the info. Ill be crawling under it tonight to take a look...... dam gravel driveway....

Maelthra
06-19-2008, 06:32 PM
w150 will be a D44 front (Five bolt) and the rear will be a 9 3/4 (Five bolt) [I believe, don't quote me on the front axle though)

3/4 tons got D44 (ate lug) and D60

one tons (Like mine :D) got D60 / D60

crazylike
06-19-2008, 08:07 PM
W150 like mine have 1 tonne D60 also

barracuda
06-19-2008, 08:28 PM
are you saying that the half tons cams as one tons from the factory?

crazylike
06-19-2008, 09:28 PM
no
they all to my knowledge came with d44 junk up front and 9 3/4 or d60 semi floater rear 5 bolt.
i was saying mine w150 has D60 front and rear 1ton axels also.
some w250 came with 1 ton axels also they where mostly dispatched for military use where known as M880

Tehaids
06-20-2008, 11:00 AM
if ya cant figger it out call the dealer with the vin and they will tell ya

Well the dealer was usless, appearantly they can only go back to 1990, or so say Maple Ridge Chrysler.

Im gonna go ahead and call it a Dana44 up front and pickup a Hub socket so i can change the rotors. They need to be done quite badly.