View Full Version : anyone wanna!

05-13-2008, 05:45 PM
Anyone out there interested...in fixing the rearend in my f-150 ....?

05-13-2008, 08:11 PM
i can "fix it" but you might not want that...

05-13-2008, 08:59 PM
whats wrong with it?

05-13-2008, 09:23 PM
i can fix the whole truck for ya...... whats your address... i know a guy with a wrecker

FU Toolbag
05-13-2008, 10:20 PM
What needs fixen? What year?

Bent Black
05-13-2008, 10:50 PM
i can fix the whole truck for ya...... whats your address... i know a guy with a wrecker
[15] [15] [15] [15] :rockhorns:

05-14-2008, 02:10 PM
it's a 1990 ford f-150 302 5 speed 6 inch suspension lift....

Anytime the rear end is under pressure ie: going up hills or coming down.....hitting bumps in the ground...

It will start to shake from side to side and start shaking like the whole truck not pretty either.However it will stop as soon as i brake and almost bring the truck to a stop....

So the truck is in kelowna....and ya so it could be bearings or maybe even the angle of the pinion is off not sure not a mechanic by any means. Also i belive it is a ford 9 inch and i'm pretty sure the gears are 373's.

05-14-2008, 02:41 PM
check ur u bolts...yo

05-14-2008, 03:42 PM
make sure your tires are bolted on tight and are full of air [cheers]

05-14-2008, 08:05 PM
Seriously could it be that simple....? the rear u joints were just replaced

05-14-2008, 09:31 PM
hey...if the rear u-joints were just replaced that would be where i would start and go from there...CHOCK THE WHEELS...put it in neutral ...get under there and give 'er a real hard up n down and side to side shake.....and watch for any movement either from the u-joints or the front bearing...even a little bit is too much...

05-15-2008, 12:21 AM
Is there excessive play in the stearing box, I've seen that cause a death shake. If it was older I would say trac bar bushings..