PDA

View Full Version : 91 ford f250 front 60 swap


Ginger Snaps
04-17-2008, 09:37 PM
does anyone know if a 79 ford 60 will work in a 91 f250 i know you have to sas it but i heard that the offset may not be right can anyone verify that:dontknow:

boyzen
04-17-2008, 10:53 PM
yep they do not fit with out moveing the saddles wider apart.I can measure tommorow if ya want

Troy
04-17-2008, 11:00 PM
does anyone know if a 79 ford 60 will work in a 91 f250 i know you have to sas it but i heard that the offset may not be right can anyone verify that:dontknow:

if your not going with leafs and your going to do the 4 link, then all you need is a np205 or 203 t-case to give you the right offset for the front driveshaft

Crazy_Eye
04-18-2008, 07:32 PM
if at all possible try and find one from a 86 to 91 f350. they bolt right in.

Always broke
04-18-2008, 07:40 PM
if at all possible try and find one from a 86 to 91 f350. they bolt right in.But then your stuck with ball joints . Just move the perches not that hard to do :dontknow:

Crazy_Eye
04-18-2008, 08:00 PM
But then your stuck with ball joints . Just move the perches not that hard to do :dontknow:

no, 86 to 91 were king pin. 92 and up were ball joints

Maelthra
04-18-2008, 09:13 PM
I have a D60 balljoint axle, doesn't have axleshafts or knuckles but there gears are there. It'll bolt into your truck and I believe you can use the knuckles, spindles, brakes and hubs from your D50 on it

Ginger Snaps
04-18-2008, 09:29 PM
found one thats complete thanks anyways doood