View Full Version : cj7 high steer set up

04-12-2008, 03:04 AM
what is needed just the high steer mounts ..... or do i need other things like steering box??? what kinda brackets ect... ???? any info would be greatful[cheers]

04-12-2008, 09:23 AM
You are gonna need to do a knuckle conversion there is no where to mount "high steer arms" on the stock knuckles.

04-12-2008, 09:32 AM
Let me guess a CJ with a spring over swap done[16] when are you guys ever gonna learn:dontknow:

CJ with spring UNDER axle still.

Let's see a spring over flex like that . . .

04-12-2008, 02:16 PM

Mr Vic
04-14-2008, 01:53 PM
for my high steer crossover setup, i took the knuckles, caliper braket, stub axles and spindles from a mid 70's chevy dana 44. then used 78 F150 hubs/rotor, inner and outer wheel bearings. calipers from a 78 jeep dana 44.

i originally bought a flat steering arm setup from sky manufcturing in Oregon but cause i have spring over and the spring perchs are tall i needed a custom steering arm with 3" rise.

custom tie rod and draglink with chevy 1 ton TRE. steering links, raised arm and machining of knuckles was done by Phil at TDD in chilliwack.