PDA

View Full Version : 1980 ford f250? feeler?


crazylike
03-25-2008, 09:18 AM
is 1500 a good deal for a 1980 ford f250 400m 3 inch lift 4x4 decent body bush bumpers its grey primer not painted has about 160kms on it. new rancho shocks come with it runs good propane dual glass pack blue bottles. all the bearings and ball joints etc done.

fullsizebronco
03-25-2008, 05:52 PM
to tell you the truth 1500 does not sound to bad for any looked after 4x4 and it has the lift and if you where going to price that out maybe it would be worth looking into

Deathtrap
03-25-2008, 07:00 PM
Sounds like a good deal to me, Id probably buy it.

nonhighwayservice
03-25-2008, 08:45 PM
the 3" lift is probably just body...but the propane is the selling feature...1500 sound pretty good

crazylike
03-25-2008, 09:15 PM
heard it run today it runs good has lots of go for a propane motor was pleasantly surprized drove pretty good no noticable noise or rattles but still not sure if i can drive a ford. if anyone else wants it or wants to have a look pm me for info.

Redneck Lincoln
03-25-2008, 11:43 PM
1980 had a punched frame (full of large holes) VERY weak careful.

FINGERS
03-26-2008, 05:35 AM
unfortunatly the 400m was not the greatest motor .and yes the 80 was a "test"frame as they called it ,Lots of holes to stress crack

Troy
03-26-2008, 11:28 AM
unfortunatly the 400m was not the greatest motor .and yes the 80 was a "test"frame as they called it ,Lots of holes to stress crack

unfortunatly you drive a jeep

no stock motor is the 'greatest'

that being said, they can be built to be a wicked motor with alot of bottom end torque because of the 4'' stroke