PDA

View Full Version : need help 96 tacoma lift


Blazerboy
03-14-2008, 06:24 PM
i need help finding out a way to lift my 96 tacoma more. i have a 3 inch body lift and 33" tires and they rub a little bit in the front. im on a tight budget. Im wondering if there is any way of cranking torsion bars or any other ways for a cheap little lift to stop the rubbing

Newfie
03-14-2008, 07:47 PM
http://www.4wheelparts.com/PDT17755.aspx this is a good kit. Or you can run just a leveling kit. If you still want a rake after the front kit you can use a block in the back.

highwaystar
03-14-2008, 08:50 PM
www.toytec.com (http://www.toytec.com) has alot of good options for 1-3" lift. if you go over 2" you should also save up for some manual hubs to cut down on CV joint wear. tacomas dont have torsion bars but coil springs. a tad less tough but a million times better ride [36]

Blazerboy
03-15-2008, 02:01 PM
toytec.com brings me to a shopping site for kids. I like that one kit soloxxx, is there any way to just buy coil spacers ands run a block or reverse shackle in the back

highwaystar
03-15-2008, 03:05 PM
sorry im mongaloid

www.toyteclifts.com (http://www.toyteclifts.com) I think if that doesnt work just google toytec

d0ubledown
03-15-2008, 07:51 PM
tacos dont have torsion bars. they're a coilover strut suspension with double A arms.

what is it hitting? just trim/BFH whatever is in the way. or you can get a spacer lift from toytec, then you'll have to bump up the back a bit. a shackle lift should suffice...

Newfie
03-17-2008, 01:28 AM
toytec.com brings me to a shopping site for kids. I like that one kit soloxxx, is there any way to just buy coil spacers ands run a block or reverse shackle in the back

Thats what the kit I posted is. but all the leveling kits are just spacers for the coils. Than you can go to the local spring shop and get a block and new u bolts to get the rake you want.

P.S. the link in your sig doesn't work.