View Full Version : Q. #2 1969 chev long box wheelbase???

t dogg
03-10-2008, 05:58 PM
i did a reverse shakle flip with longer shackles and beefyer springs. i think it made my wheel base quite a bit shorter. my box is being rebuild as we speek(actully its done now). -any one know what the stock wheel base is???
-should i use tracktion bars to pervent axle wrap???
- cut the wheel well to make up for it (its not to late)
or shorten the box???

03-10-2008, 07:16 PM
you will be fine remember the wheel goes backwards when you flex not forward[16]

t dogg
03-10-2008, 07:55 PM
man i gotta be shorter do u know what the wheel base measures???

03-10-2008, 08:50 PM
its 131in.center to center stock

t dogg
03-11-2008, 05:16 PM
sweet thanks.... ill be right back with what i have...........

t dogg
03-11-2008, 05:23 PM
as long as your sure it should be 131 "CENTER to CENTER" im fucked i have 125 center to center....aaarrrrrggggg!!!

t dogg
03-11-2008, 05:47 PM
http://www.chevytrucks.org/resources/history_of_chevy_trucks.htm here it says 133 wb but im not sure if its c 2 c???...i have 125 WTF!

t dogg
03-11-2008, 05:49 PM
i have a half ton!!!!!!!!!!!

03-11-2008, 07:15 PM
your fine dont worry your ok at that just put the box on you will see

04-06-2008, 08:18 PM
longbed std cab:
131.5" for 73-87
127" for 60-72

t dogg
05-03-2008, 09:11 PM
well that anit bad?? im puttin the box back on tomorrow, well see!!! ill post it!

t dogg
05-05-2008, 06:47 PM
its 3 to 4 iches off center, im goin to spin the leaves/ened for end!