PDA

View Full Version : bogger fitment ???


bcwheeler
02-26-2008, 06:13 PM
will 35 16 15 boggers fi tunder my chev?

75180

regulate34
02-26-2008, 06:28 PM
got a saw?
what lift ? i have 33s under a stock f150

Foes
02-26-2008, 06:50 PM
regulate, what year f150 do you drive, ive seen a few around grove on 33ish tires

Explorer guy418
02-26-2008, 07:08 PM
my friend has a 96 f150 stock with 35 inch bald boggers.

tchevy
02-26-2008, 07:20 PM
i had a 4inch susp lift in my chevy ad 33s, then put 35s and they rubbed so i had to lift it 2 more inches and they were only 12.5 wide, so i would think you are going to have to cut or go up for a wide rubber like that

cowboy-truck
02-26-2008, 08:11 PM
I have a 3/4 chev with a 3 inch body lift with 34s no rubbing issues.

cowboy-truck
02-26-2008, 08:12 PM
[5] Oh yeah sweet truck!!!

Taxidermy
02-26-2008, 08:15 PM
sweet truck [5][5][5][5][5][5][5]

Always broke
02-26-2008, 10:22 PM
Not without way more lift so you can sell them to me eh!!

HEAVY METAL
02-27-2008, 08:05 AM
6" l,ift is needed too clear 35's.. specially 16 wide.

thats if you dont ewant too trim ur fenmders..

regulate34
02-27-2008, 08:15 AM
regulate, what year f150 do you drive, ive seen a few around grove on 33ish tires

red 1996 with black canopy
33/12.50/r15lt bfg at's
you dont live oin 208th do yea

regulate34
02-27-2008, 08:17 AM
my friend has a 96 f150 stock with 35 inch bald boggers.

no fucking way i got 33s on my 96 f150 stock
and i can barly turn corners

HEAVY METAL
02-27-2008, 08:21 AM
no fucking way i got 33s on my 96 f150 stock
and i can barly turn corners


a bald 35 bogger is 32.5 tall... yo

bcwheeler
02-27-2008, 10:01 AM
ok then whos got money lol ... um guess its getting lifted some more.. wish the damned thing would jus tsell!!!!!!

bcwheeler
02-27-2008, 10:02 AM
oh and ther is already 4+ inches lift in it.. and its on 35 1250 15 'so now no rub not even close but a 16.5 is WAY more bigger

duff
02-27-2008, 11:42 AM
but the tire is still just a 35, I would be more woried about the width and back spaceing, what are you selling the truck for? is it running yet?

bcwheeler
02-27-2008, 11:58 AM
Yeah its runnin gneeds some very minor shit liek coupel interior trim pieces , and bench cover or new bench .. we put a 350 in it.. 700 r4 it runns good needs some fine tuning with teh shifter thingy.. um I have it listed for 7500 obo Its to clean and tight rides way too nice to sell fo rany less, plus I have already done the work on it .. Im sure its a high price but I think fare

StinkFinger
02-27-2008, 12:13 PM
my buddy ran 35,s bfg on his suburban no prob and could baraly run a 33 bogger
its the width that kills ya

KINGCRUISER
02-27-2008, 01:12 PM
Ok if the truck is already on 35's, bolt the boggers on and rip it up until they have worn a bit and fit properly. Glens is running 38's on his bronco with little to no lift and some minor triming.

Toyquad
02-27-2008, 01:59 PM
so he asked " will 35 boggers fit my chev"

so a couple retards reply with " i fit 33's on my f150"

who gives a fuck whats on your piece of shit ford......he's askin about a chev ya dumbfucks

FINGERS
02-27-2008, 02:13 PM
BAHAHAHAHAHAHAHAHAAHAHAHA

duff
02-27-2008, 02:43 PM
I had 33's on my toyota :D :D ???????????

StinkFinger
02-27-2008, 02:47 PM
i got 40's for my suzuki

redman
02-27-2008, 02:57 PM
i got 40's for my suzuki


keeping that in mind then the 35's must fit the chevy [15]

bcwheeler
02-27-2008, 08:18 PM
Ya'll is all messed up .. Will they fit or not/

duff
02-27-2008, 08:43 PM
shure.................... do eeeett!!!!!!

regulate34
02-29-2008, 07:56 PM
a bald 35 bogger is 32.5 tall... yo

really that much diferance

regulate34
02-29-2008, 07:59 PM
so he asked " will 35 boggers fit my chev"

so a couple retards reply with " i fit 33's on my f150"

who gives a fuck whats on your piece of shit ford......he's askin about a chev ya dumbfucks

i still think my post was more helpful than yours

Toyquad
03-01-2008, 11:59 PM
i still think my post was more helpful than yours

hmm so my assumption of you being a moron was correct

HEAVY METAL
03-02-2008, 12:02 AM
really that much diferance


ud be surprised at how short any bogger measures out too

Toyquad
03-02-2008, 12:05 AM
ud be surprised at how short any bogger measures out too


but they are still cool cause there boggers

regulate34
03-02-2008, 12:15 AM
hmm so my assumption of you being a moron was correct

well i gess so
you must have to own a toyota and a quad to be able to put a line of words like that tougher
your so special

kinda nasty
03-25-2008, 03:34 PM
You can fit any tire on any truck depending on how much cutting you are willing to do. I had a stock 85 chev 1/2 ton and I made 39.5 x 15.50 x 15" swampers fit. It didn't turn well but what the hell. With a 1979 chev blazer with a 4" suspension lift and 35" big o mud terrains I had to do a little trimming on the front and rear of the front fender openings and I run 1/4" wheel spacers on the front. I also run my 36" swampers on the same truck. Boggers are worse because of the tread design. Don't get me wrong I love boggers. Good luck to you. Maybe try your local tire store. They are usually willing to test fit a few before you buy.

dirka dave
03-25-2008, 04:37 PM
:D I gots 37's on my 82' toy.....:D