PDA

View Full Version : Tracker Build


REZ
01-30-2008, 04:21 PM
So fainally I post my truck pics up.

when I bought it after taking the front bumper off

then I went boating with it and hydrolock

REZ
01-30-2008, 04:35 PM
I start building it up then, first the body work in my appartment.
I had so many complain :D

then reinforce the frame

custom snorkel

REZ
01-30-2008, 04:52 PM
got 3"calmini sus and 3" body.
4" gas tank lift.
engine fully rebuilt top to buttom.
trany and T case rebuilt.
centerforce dual fric clutch.
header and 2" exaust
custom fron and rear bumper
custom skid plate
custom snorkel
high angle D shaft
locked rear diff
heavy duty axle
tubar roof rack
9500 lb winch
inclometer
6x9 speaker and 12" sub
31x10.5 xterrain


Thanks a lot to:
John for Bumper fab
Mike for the deals
Tyson for gas tank

4x4freak
01-30-2008, 06:15 PM
nice truck

MUD CHILD
01-31-2008, 12:45 AM
Looks good[36]

youngun
01-31-2008, 01:02 AM
glad the gas tank lifted ended up working out good

REZ
01-31-2008, 10:46 AM
ya it just needed some more grinding.....

Taxidermy
01-31-2008, 10:15 PM
cool [36][36][36]

4doorkicker
02-05-2008, 09:51 PM
Put some tube steps or sliders on it, just to cover up the frame a little.

Roc
02-05-2008, 10:32 PM
sweet looking rig u got there

REZ
02-05-2008, 11:23 PM
I gone make a side slider soon or I might buy the ones from trail tough

REZ
07-09-2009, 12:36 AM
Back to work
going to change lota things in the truck

All new suspenssion setup, lifting 2 more inch. jonny joints

adding about 4" to wheel base, 1.75 front, 2 in the back

lock the front

full skid and rock sliders

Tcase gear

roll cage

tool box and sub

power steering

inboard air

4 front offroad light, 2 back, and 2 under

tire carrier

34"x10.5 super swamper LTB

2" spacers

REZ
07-09-2009, 12:39 AM
so far got a front diff made of steel , locked, with added inner shaft.
and modified to driver's cv on both side

REZ
07-09-2009, 12:40 AM
will post pics soon

str8ghtpipes
07-09-2009, 02:27 AM
loven it man.

Cheeky
07-09-2009, 02:32 AM
your going to love it locked in the front,go easy on the happy pedel:D


Best mod I ever did,JUST GO EASY ON THE HAPPY PEDAL[cheers]

REZ
07-09-2009, 11:26 AM
specially with 34"x10.5 super swamper ltb's that I am getting.

REZ
07-09-2009, 03:29 PM
new front strut upper and lower bracket to move 1.1/3 " forward and correct the camber

and painting in my appartment balcony :dontknow:

Reeseman
07-13-2009, 08:39 PM
I am looking for a cheap tracker to build.

bcmaxx
07-13-2009, 09:02 PM
nice tracker! what do you have into it $$ wise?

D-Ass
07-13-2009, 11:23 PM
looks really good [cheers]

REZ
07-14-2009, 12:13 PM
nice tracker! what do you have into it $$ wise?

except the previous lift kit, almost everything else is home made

with all the new stuff and old stuff around 12 or maybe more:dontknow:

dirka dave
07-14-2009, 02:08 PM
I like the Chinese newspaper grasshopper.


:roll eyes

Troy
07-14-2009, 02:23 PM
i like the plastic fork in the flower box

blower
07-14-2009, 04:47 PM
hurry up and get it done,we'll go hit the coquihalla.cheers.looks good.

REZ
07-15-2009, 04:13 PM
by end of next week, ready to wheel

MUD CHILD
07-15-2009, 04:33 PM
Do you have any pics of the steel front diff housing?

REZ
07-16-2009, 01:23 AM
will take some,
that thing is solid, I made a skid plate too

REZ
09-18-2009, 05:01 PM
new cast iron diff

REZ
09-18-2009, 05:04 PM
new 34 tire
and a bit large :o front was rubbing on fender when flex

REZ
09-18-2009, 05:07 PM
cut 1" front and a bit from rear

REZ
09-18-2009, 05:19 PM
......

REZ
09-18-2009, 05:22 PM
now time for flexing[36]

REZ
09-18-2009, 05:24 PM
put some washers under the tire carrier and take the brake light out, and 34 fits

locked the front

rock slider

and full skid, pic coming soon

bcmaxx
09-18-2009, 05:47 PM
Looks very good!! quite the transformation!

regulate34
09-19-2009, 03:51 AM
lovin the tracker
but they cast iron front dif houseing
and not the calmini anvil?

REZ
09-19-2009, 03:56 AM
I got one much more heavy duty than anvil,

but I ended up using the cast iron, still very strong, and I build a skid plate

blower
09-19-2009, 10:06 AM
is it gonna flex better then this now.[f] [cheers]

REZ
09-19-2009, 01:31 PM
we gota get out to see, if you can follow [f]

[cheers]

thrillbilly
09-24-2009, 01:19 PM
wow rez looks awesome i remember last year wheelin with ya this tracker has come a loooong way!

regulate34
09-28-2009, 11:15 PM
yeah rez this is one ballz to the wall tracker

REZ
09-30-2009, 03:48 PM
thanks guys
now got hard top [36] [36] [36]

I don't hate winter anymore, my GF don't need to go in a sleeping bag while seating in my truck:fire

REZ
10-01-2009, 06:14 PM
test the locker, ,,,
spined the rear tire deep in sand

REZ
10-01-2009, 06:15 PM
put on 4x4, and it was out easy

REZ
10-01-2009, 06:21 PM
Had to weld the fender after cut,
didn't have any feeler, so I bend some dims and use as a feeler:confused0006:

REZ
10-01-2009, 06:25 PM
I had great experience dealing with Low Range, Sean



And fuck Zuki Nation, Jefgo fuck yourself go fuck yourself go fuck yourself go fuck yourself

regulate34
10-01-2009, 07:37 PM
lookin great man keep going

old codger
08-04-2010, 08:55 AM
Hi Somewhere in space there must be the intro letter & pic of my GM Tracker that I sent to you guys 2 weeks ago!! maybe check your files?.
old codger.

S Kicker
08-05-2010, 12:49 PM
Nice work Rez[cheers]