PDA

View Full Version : U bolts


epic3
01-09-2008, 12:47 PM
Who do you guys get em from in the vancouver (near richmond) area
Lordco no Napa no Aklands no Metal supplier I use is a no too:dontknow:

Stetson
01-09-2008, 01:04 PM
don't know around richmond vancouver, but I usually buy them from any spring shop, walk in the door with the measurements, (bolt size / width / square bend or round) and they make them in about 10 min. A set (4) with nuts and washers is usually 50-60 dollars. Done this in Burnaby, Langley, and Coquitlam. I'm sure if you look up any spring shop in your area they should be able to help you.

ps you CAN order them through someone like Lordco, but they charge 80-90 dollars and take 3-4 days........ or a week.... and so on

epic3
01-09-2008, 01:07 PM
I want em NOW damnit!!

Spring shops eh I'll start lookin around then

B
01-09-2008, 01:11 PM
canada spring ...

Momma Taz
01-09-2008, 01:12 PM
north shore off road is were we get them from

epic3
01-09-2008, 01:13 PM
NSOR is too far for me and my bus pass

I'll look up Canada spring I've heard of them

Found em parts ordered thanks guys

the_balls
01-09-2008, 02:24 PM
good choice, the guys at canada spring are awesome.

dirka dave
01-09-2008, 03:32 PM
Canada spring....

redneck princess
01-09-2008, 04:02 PM
The bf works at Traction. Its in Coquitlam (90 Glacier Street) its a heavy duty truck parts store.They make them there, any size ya need. Im not sure on the price, but call and ask for Ray. Tell him your from FIBC. Heres the number 941-0307
[cheers]

flankers
01-10-2008, 06:34 PM
scott springs on scott road and old yale (108 ave)15 minutes 50 /60 bux

gavman
01-10-2008, 06:39 PM
NSOR is too far for me and my bus pass

I'll look up Canada spring I've heard of them

Found em parts ordered thanks guys

I heard the fares were going up but u have to fix the buses too?

nbrowser
01-10-2008, 06:54 PM
Canadian Spring in Burnaby on Norland could whip up a set of u-bolts custom to any size ya need, trust me I know.......having done some spring swaps at where I work, they always custom make their u-bolts