View Full Version : need more room for more rubber

01-08-2008, 07:06 PM
34 " LTBS be her in 10 days need more clearance in the wheel wells . Need spacers and or some fender trimming and what not ? where to go ?

01-08-2008, 07:23 PM
you can try jeep thrills or NSOR for spacers?

Jeep Victim
01-08-2008, 07:56 PM
Sawzall and a zip cut Mikey,your rig is ugly anyway!

01-08-2008, 09:20 PM
um if I remember,you run a cheerokee????If so,dont cut to deep,unibody needs as much help as it can get as it is....wheels spacers might work but I think a combo of both may be the easy way[cheers]

01-08-2008, 11:26 PM
even tho its unibody its still reinforced by a full frame you can cut the wheel wells right out of it

01-11-2008, 07:45 PM
I cut my wells up when I put my wackers on last january to pass a VI... made a real mess. was going to weld the pinches back together but never got around to it. Had some flex this summer. ONly down side is the fiberglass hatch which cracks all over, as its the only thing left to take the stress... no biggy. cut away. I've got a two inch block if you need it, but its got 7 deg. cut into it (ya, I know, no welder at the time)

01-11-2008, 08:02 PM
Go talk to B about some adjustable coil spacers yo...you'll want them anyways regardless of the lift you run..just to fine adjust and level-r out.

01-11-2008, 08:55 PM
Amazing what ya can do with an XJ when you have acces to a zip cut wheel....I made 31s fit on my stock height XJ...looks killer.....minimal hacking too......then again it's gonna see a measily 2 inch lift soon enough and a set of 32s......can be done easily

01-11-2008, 08:58 PM
It's funny what they call 31s these days. I would probably be rolling my fenders before hacking them..unless I really didn't give a fuck about what it looked like.

01-11-2008, 09:00 PM
heh I've done minimal hacking into the metal, however the plastic flares on the front have seen some modification.......and no, I don't give a fuck about what it looks like, it's a Heep I picked up cheap and I've wheeled it already......and got some carnage to prove it !

01-13-2008, 03:56 PM
are you going to be dd these tires? was thinkin of gettin them for my toy but not to sure how they are going to be on the road

dirt balls
01-17-2008, 06:58 PM
all you have to do is add a 2'' spacer f/r about 65 bucks pair and trim the bumpers a little and your be fine [cheers]

01-20-2008, 08:30 PM
are you going to be dd these tires? was thinkin of gettin them for my toy but not to sure how they are going to be on the road

These are not a good choice for DD tires. I have a set of 34X10.50X15 LTB's on my Cherokee right now. They are freakin loud and bumpy [36]

01-20-2008, 09:19 PM
thats what i figured. the price of them makes them so tempting

01-21-2008, 12:59 AM
road manners ..quote from the rep at Interco . Little to no difference in teh reg tsl 's Just a lil bit louder.. tiny siping job and theres no difference in teh handling.. What s alil bumpy and noise anyway

01-21-2008, 05:05 PM
very true. i'm thinking that will be the set of tires i put on my toy when i have the money. let me know how you like them.[cheers]