PDA

View Full Version : front break problems...


Irwin
11-26-2007, 11:03 PM
i have this problem with my front breaks..i re bled them...when the truck is turned off the break is fine..roles fine breaks fine..i turn the truck on..break pedal to the floor...no breaks beside my back breaks
need help fast...any ideas

bakelite
11-26-2007, 11:05 PM
brake booster, mine did the same thing.

Irwin
11-26-2007, 11:06 PM
are u 100 percent positive?

bakelite
11-26-2007, 11:11 PM
No, I'm lying, it's your muffler. How can I be 100% positive on the internet?


My brakes would fail when the front was uphill a bit, go right to the floor. Otherwise worked fine for a while. I'm pretty sure that is what it is.

bakelite
11-26-2007, 11:12 PM
If the pedal goes to the floor how do you have back brakes anyway??

92jeepcherokee
11-26-2007, 11:15 PM
mine had that problem and it was the master cylinder

92jeepcherokee
11-26-2007, 11:17 PM
tha back brake rezivor is at the front of the master cylinder thats y there is only back brakes

Irwin
11-26-2007, 11:33 PM
i only have back breaks....like id put the pedal to the floor and my back breaks would lock up..and there would be no front...

bakelite
11-26-2007, 11:38 PM
i have this problem with my front breaks..i re bled them...when the truck is turned off the break is fine..roles fine breaks fine..i turn the truck on..break pedal to the floor...no breaks beside my back breaks
need help fast...any ideas


which is why I think it's the booster...you can check if the m/cyl is working real easy. Go back to where you started and try again. I still don't understand how the back brakes work with no pedal pressure. :dontknow: but I ain't a mechanic obviously [15] Good luck [cheers]

Irwin
11-26-2007, 11:40 PM
which is why I think it's the booster...you can check if the m/cyl is working real easy. Go back to where you started and try again. I still don't understand how the back brakes work with no pedal pressure. :dontknow: but I ain't a mechanic obviously [15] Good luck [cheers]

k when the truck is turned off..the break works..when its turned on...the break doesnt work..

Moondog
11-27-2007, 12:07 AM
No, I'm lying, it's your muffler. How can I be 100% positive on the internet


[15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15] [15]

Nice one Joe I just spat coffee all over my lap top

brothergrimms
11-27-2007, 12:13 AM
go ask on bc4x4go fuck yourself

jeepxj89
11-27-2007, 04:55 PM
No, I'm lying, it's your muffler. How can I be 100% positive on the internet?


My brakes would fail when the front was uphill a bit, go right to the floor. Otherwise worked fine for a while. I'm pretty sure that is what it is.


hahaha that just made my day

duff
11-27-2007, 05:05 PM
[16] [16] [16] [16] [16] [16]

why do people who dont know what their doing feel the need to do the own brakes of all things? why not just mess around with yer timming belt or something so the rest of us dont haveto feel unsafe on the road?

why did you bleed your brakes in the first place? to get rid of this problem or did this problem show up after you bleed them?, if it showed up after , then you bleed them wrong and have air in the sistem,

good luck, [cheers] [cheers]

Bocephus
11-27-2007, 06:55 PM
probably ur master cylinder one of the pistons is stuck (probably the one for the front brakes) if its a dual master cylinder type which it probably is a new master cylinder is only like 30 bucks and took me liek 20 minutes to put it in other wise its probablly ur muffler liek joe said

hoser
11-27-2007, 07:19 PM
[quote=duff;1200304][16] [16] [16] [16] [16] [16]

why do people who dont know what their doing feel the need to do the own brakes of all things? why not just mess around with yer timming belt or something so the rest of us dont haveto feel unsafe on the road?

hey come on now he is a member of hardcore 4x4..he knows what hes doing

duff
11-27-2007, 07:42 PM
insert not suprized smilley here