PDA

View Full Version : No oil top end??


craig24
11-08-2007, 06:15 PM
Ok, so I got the Jeep fired up the other day, and after a min. of running it the top end was ticking quite bad. Pulled of the oil cap while it was running and noticed no oil splashing around. Pulled the pan off again, pulled out the oil pump and tested it in the garage. Nothing. So I replace the oil pump and pick-up tube, and prime it in the garage and oil comes flying out. Great.....put it all back together, pull the coil wire off to prime the engine using the starter. Beacause I had no help I just cranked it for 15-20 seconds a couple times. Put the coil wire back on and fired it up. NO F***ING OIL AGAIN!!
What am I missing? Any idea's?