PDA

View Full Version : 54mm socket


TWOZEROFOUR
10-15-2007, 10:27 PM
Any one in kelowna have one I can borrow, I tryed to by one to day but no one seems to have them. I will bring beer and loose ladies[36]

Thanks

Cory.

shawn_ruley
10-15-2007, 10:37 PM
biggest I gots is a 34:(

what the hell would you need a 54mm for?:confused0006:

shockless
10-15-2007, 10:38 PM
hey cory, pm Dave (exo-toy) on crawlin, i bet hes got one

Big_Ern
10-15-2007, 10:44 PM
biggest I gots is a 34:(

what the hell would you need a 54mm for?:confused0006:

pinion nuts for a solid axle. I believe IFS uses the same size...

Some guys cheap out and use a chisle & hammer to pound them on/off, but you can't tourque them doing it thi way, and the tourque is pretty important since they hold your wheel bearings...

204 - Lordco should have the 54mm socket -= I walked in and grabbed one off the shelf anyway... Don't go up to the counter and ask, they'll look at ya dumb for a socket that big[wako] It's in the special tools rack. It uses something dumb like 3/4" drive, so you'll need to get an adapter down to 1/2" and/or 3/8" depending on what ya got for tools[cheers]

Toyrantula
10-15-2007, 10:56 PM
i got one here in vernon. call me at 549 7129 ask for tyghe

sj-x 500
10-15-2007, 11:56 PM
i got one in kelowna, and the 1/2 - 3/4 adapter, james western star 765 5555, ask for larry

it's for the hubs

TWOZEROFOUR
10-16-2007, 02:34 AM
Correct!

i got one in kelowna, and the 1/2 - 3/4 adapter, james western star 765 5555, ask for larry

it's for the hubs

KINGCRUISER
10-16-2007, 10:55 AM
Grant and Ira have one, PM me with your number and i'll call you if they aren't using it.

kamloopsyota
10-16-2007, 06:19 PM
trail gear has em for $14 for a 3/8ths ratchet.....you know you'll need one again

shawn_ruley
10-16-2007, 06:32 PM
pinion nuts for a solid axle. I believe IFS uses the same size...

Some guys cheap out and use a chisle & hammer to pound them on/off, but you can't tourque them doing it thi way, and the tourque is pretty important since they hold your wheel bearings...

204 - Lordco should have the 54mm socket -= I walked in and grabbed one off the shelf anyway... Don't go up to the counter and ask, they'll look at ya dumb for a socket that big[wako] It's in the special tools rack. It uses something dumb like 3/4" drive, so you'll need to get an adapter down to 1/2" and/or 3/8" depending on what ya got for tools[cheers]

havent gotten that far into my truck yet, but Ill keep that in mind:party0010:

sj-x 500
10-21-2007, 05:55 PM
nevr got a call so i assum that you got it taken care of?

TWOZEROFOUR
10-21-2007, 09:09 PM
yea i borrowed a 2 1/8th off a guy i work with.. worked great!