View Full Version : First time replacing cab corners, any tips, pics, or pointers?
10-10-2007, 06:16 PM
Im replacing the cab corners on ol' green and havent done cab corners before. Im not a bad welder and have heard of many different ways to do it, does anyone have any experience doing them and whats the best way to attack this project. Thanks.
10-10-2007, 10:55 PM
place the new corners over the cab corners and mark all the way around with a fine pen the cut on the inside of the line with a grinder. claen all surfaces tack it in place then slowly weld it in place grind smooth bondo and bobs ure uncle .. Thats what i did both sides took me about 3-4 hours
10-11-2007, 07:12 PM
rock on, yeah ive been lookin at a few websites and thats what they say to do, looks pretty simple.
burn the hole thing to the ground go buy a chev [f] ...
10-11-2007, 07:40 PM
dont listen to that dumbie fords rule he just wishes he had a ford..but hes got a ford part in his chebbie...
10-11-2007, 10:08 PM
Some pointers though, take your time take a stright edge and make shure their are no high spots key thing is to Take your time oh ya your also gonna want several beer per hour . Good luck post some pics when shes done
10-13-2007, 03:13 PM
make sure when welding it do staggerd tacks so tack one side move to the other and work your way too the middle from eather end of the metal too stop warping,
10-18-2007, 06:39 PM
Okay so heres how it went.
Chipguarded the insides and inside the new door sill.
10-18-2007, 06:41 PM
10-18-2007, 06:42 PM
all in all took about 10 hours to do, and two cases of beer
vBulletin® v3.6.4, Copyright ©2000-2018, Jelsoft Enterprises Ltd.