PDA

View Full Version : chev info


Toyrantula
08-08-2007, 10:21 PM
my kid got a chev truck that WILL NEVER see the road ever. so we are going to part it out.

I di know it is an auto, possibly a 400 since it ha a towing package and full floater axles in it.

I need a link to figure out front axle, tranny and rear axle shouldnt be a problem. but t case might be.


ANyone needing chev parts about an 84 ish year?

chevy69chevelle
08-09-2007, 02:16 AM
I need a front clip

HEAVY METAL
08-09-2007, 07:07 AM
take pic.. i can tell ya what ya need too know..

m j
08-09-2007, 03:28 PM
84 will have 10 bolt front
3 speed auto or 4 speed?

tenpack
08-09-2007, 04:11 PM
If its a true 3/4t and un molested(rare since they are old and so interchangeable) it should have a turbo 400, look at the pan.

Full floater rear axle should be a 14 bolt, and the front should be a 10 bolt. If they are 4.10s and in good condition, 3-450 for the pair aint bad. Depends on brakes, balljoints...etc.

Tcase should be aluminum and a 208. I have an 83 k2500, 10 bolt front, 14 bolt ff rear, 350 engine, turbo 400 trans and a 208 t case.

Toyrantula
08-09-2007, 06:01 PM
i gotta get past the bees nest b4 i can do nething with it.

SBC hris
08-10-2007, 07:29 PM
I might be interested in some stuff depending on the condition.

ottoman
08-10-2007, 10:32 PM
what year is it

Toyrantula
08-10-2007, 11:24 PM
i am guessing in the early 80`s?

if you need anything send me a list. i am goin bee huntin in the morning and getting some pics and pullin the motor.dont know what to do with a heavy flateck thats on it?


from what i could tell the interior is minty fenders hood and grill seem to be good.

doors had them stupid mirrors thtat hang off the door leaving holes. cab is rotten. all glass is good.


need a compression tester for the motor and a battery to run it up.