PDA

View Full Version : Whats a 351 Cleveland worth?


Maelthra
05-28-2007, 07:08 PM
I found me a complete one for $400, wondering if its worth it or not. :dontknow:

Tha_Stepside
05-28-2007, 07:16 PM
if its a runner with decent compression, go for it, if not, id give him $150 and a case of beer

Tha_Stepside
05-28-2007, 07:16 PM
is it a 2bbl or a 4bbl?

brothergrimms
05-28-2007, 07:41 PM
if it runs buy it and run they good motors and it does't matter if its a2or4 bbl stop buildin them ithink in 70 good find

Nutbar
05-28-2007, 07:46 PM
couldn't tell ya what it's worth (don't like ford engineering would never use em) but they are not bad engines . . . IF . . . you can keep the conecting rods from parting company with the crank or the pistons.:dontknow:

Little Mule
05-28-2007, 08:22 PM
Don't know what there worth, but the 4 barrels are getting hard to find.

I'd like to find one.

m j
05-28-2007, 08:30 PM
they were made from 70 til 74
the good stuff is 4v close chamber heads
I collect C stuff
the later engines had the less desireable heads but you are more likely to find a 4 bolt main block. D2AE casting on mine

Maelthra
05-28-2007, 10:13 PM
Its a 2v, I'll have to check the casting numbers some other time.