View Full Version : Time for my 360 to go in

get stuck
04-21-2007, 01:04 AM
the 360 is out of a 2wd truck and the truck has a slant 6 right now will the 2wd tranny bolt on to the t-case fine or is there anything differnt :dontknow:

04-21-2007, 02:50 AM
If it's anything like a Chev the answer is no. You will likely need an adapter in the middle to join em. The back of a 2wd tranny will likely be a yoke for a ujoint or a slip yoke, both of which wont connect to a tcase...UNLESS it is a divorced case...in which case, giver.

04-21-2007, 10:45 AM
you will need about 1000$ worth of adapters...

get stuck
04-21-2007, 11:48 AM
theres alredy the adapter that comes off the t-case

04-21-2007, 12:34 PM
Why would you bother with the tranny? Yank the 6 out and drop the 8 in, fuck pissing around with a tranny swap. And no, it won't bolt up to the t-case, 2wd always has a different tailshaft and housing than 4wd. Although I do know people who modify 2wd TH350's to work with transfer cases by changing the housing and cutting the tailshaft...but that's the only case I know of.

get stuck
04-21-2007, 07:19 PM
the tranny on the slant 6 is comeplitly differnt

04-21-2007, 07:46 PM
you need the motor i got sitting in the back yard you should make a trip to kelowna.

04-21-2007, 10:03 PM
the tranny on the slant 6 is comeplitly differnt

No shit, the 6 probably has a 904 and the 8 has a 727. It will still bolt up to the 904.

get stuck
04-22-2007, 03:17 PM
what yur saying the 360 will bolt up to the slant6s tranny

04-22-2007, 03:28 PM
yes thats what he's sayin but befor you seperate the engine from the tranny you MUST seperate the torque converter from the flywheel by removing the bolts accessible through the inspection cover on the bottom of the bellhousing

get stuck
04-22-2007, 04:45 PM
yeah i know that but i took a look at the slant 6 tranny the the one on the 360 and there too differtn they cant work the slant 6 starter is were the cylender woud be on th 360

get stuck
04-25-2007, 11:08 PM
i think a AMC 360 727 tranny might bolt up anyone no for sure

04-25-2007, 11:15 PM
My dodge knowledge tells me that smallblock(engine)bolts to smalblock(tranny),bigblock to bigblock and slantsix to slantsix...no exceptions on interchange cept for starters and such.
And the AMC 360 isn't the same either though the 727 tranny internals are.

get stuck
04-25-2007, 11:31 PM
oh ok