View Full Version : NEED 1 inch DS spacer toy axle

04-18-2007, 09:34 PM
Have a 86 tin top with Toy axles and was flat towing home from chute on sunday and lost my front DShaft at the axle, luckily I found the Dshaft but never did find my 1 inch spacer. Anybody have an extra one or know where I can get one in a hurry, would like to hit the trails this w/e, could go it in 2x4 but thats no fun!

Didnt build my rig, bought it, so I dont know what Dshaft is in it, think I bought it off a FIBC member, but dont know username (steve) but it looks like the axle end is still a toy flange....

04-19-2007, 09:44 PM
try breezeindustries or any fab guys here some might be able to make them for u

04-19-2007, 10:30 PM
The front dshaft should be a toyota driveshaft off of an... oh i think it was 79-83 "the shorter of the generation rear driveshafts" and the rear one is the stock samurai front.

04-19-2007, 11:19 PM
no, my rear is a stock toyota 79-84 front (I know because I was told, and I used my trail spare in a friends 80 toy cause he blew up his DC in his front)

I figured the front was some sort of variation on a toy, but the Diff end of the chaft is definately a toy flange no adaptor... Just gotta get a spacer, or get a new shaft made to fit but thats $$$$$ so I no think so!

04-20-2007, 01:20 AM
Its a sammi front shaft, it was either a 3/4 or 1/2 inch spacer I have a 1/2 in in the garage but i think it was the 3/4 ...call me and ill give you the 1/2 to see if it works 215-6416