PDA

View Full Version : i got a stupid q for u guys


muddy mud skipper
04-18-2007, 04:44 PM
ok well my transfer case is gone in the bronco.i was wondering witch trucks i could use a t-case from.i have a 86 f-150 with a strait 6 and a standard 4 speed.i guess that wouldnt work.

yes i know this is a stupid q.thanks any ways and the the thrashing begin[cheers]

muddy mud skipper
04-18-2007, 04:44 PM
oh yes my bronco has a c6 tranny

Maelthra
04-18-2007, 05:02 PM
NP208 or a BW1356.

A pickup T-case won't work because they have Slip yokes and Broncos have fixed.

As for the broken axle, I've got one sitting out back. ;)

F150HULK
04-18-2007, 06:09 PM
you can swap the yokes if you need to. I put one from Bronco onto My 150.

Deathtrap
04-18-2007, 09:10 PM
NP208, BW1356, BW1345, Like F150HULK said you can swap the yokes if need be, but ford used these t-cases up to the 350's I believe, on the F-series, most if not all f-250/350, ext cab long boxes came with fixed yoke t-cases because of the 2 piece drive-shafts the slip-yoke was in the middle of the rear most drive-shaft.

barracuda
04-18-2007, 10:11 PM
NP208 or a BW1356.

A pickup T-case won't work because they have Slip yokes and Broncos have fixed.

As for the broken axle, I've got one sitting out back. ;)

it can also be a 1345 . and they could all come in fixed yoke configuration even for regular cab trucks

muddy mud skipper
04-19-2007, 02:16 PM
thanks boys looks like i'm off to pick and pull:D let the hunting begin

muddy mud skipper
04-19-2007, 04:46 PM
ok so i cleanded the tags on the t-case on both trucks.and low and behold they have the same t-case,a 208 f with a ratio a 261.i'm just going to go to pick and pull and get one.