View Full Version : 92 explorer, body lift

03-15-2007, 01:40 PM
Hey, I have a 1992 ford explorer, last night i installed a 3inch body lift, got all the bolts out exept for the front 2, ive tried everything i can think of but they seem to be in there REALLY good, im just wondering if anyone else has idea's as to what i can do to get them out. Thank's in advance!

03-15-2007, 02:38 PM
do u mean the ones that are in the rad support?

03-15-2007, 03:53 PM
well, the 2 mounts of to the side of the rad, yes.im gonna try taking some heat to metal that seems to have rusted itself to the bolt.

03-15-2007, 03:56 PM
take a grinder to them cut them off the body lift should have new bolts with it

03-15-2007, 04:49 PM
if i do that they will still be "rusted" to the little metal bushing caps?

03-15-2007, 05:46 PM
do you have a long extention going down through the two holes in the rad support to get to the top of the bolt????
use a big breaker bar fron the top and it will either break or turn

03-15-2007, 10:04 PM
i had the top nuts loosend off. i just couldnt get the bolt out, but i ended up cutting the bottom bolt head off and getting a punch and hitting it out. Thanks for all the help though!

03-15-2007, 11:13 PM
Don't forget to post some pics when she's lifted! :D[36]

03-15-2007, 11:15 PM
Don't forget to post some pics when she's lifted! :D[36]

Once we get my old rims and his 33's on it, we will!

03-16-2007, 05:24 PM
i had to cut off the head of the bolt and drill out the metal bushing caps on my f-150

03-16-2007, 08:52 PM
cut them from the bottom and put new new bolts in that come with the kit. i did on my 150

03-17-2007, 10:38 AM
We got er dun, 33's go on today. Are these tires even gonna fit? lol. They're kinda bald anyway.

Also, we snapped one of the 2 rear body bolts, so most of it is still in the old mount....what do we do, torch it out and replace the factory mount?