PDA

View Full Version : small wheel spacers??


REDNECK-WELDING
03-03-2007, 12:38 PM
i am wanting to run a small wheel spacer 3/8s or so...just enough for my 255/85-16s dont rub...is there any problems with this?? if my wheel studs are long enough will there be a problem?? i dont want to get the bolt on kid as there 2" and i dnt need that much clearance...has anyone run these or know of them??? these are like the ones i mean

Jroc
03-03-2007, 12:50 PM
i amagine if your studs are long enough their shouldent be a problem?

Nutbar
03-03-2007, 01:06 PM
I have used those spacers many times even doubled up and I have had no problems with them ever

just make sure that the wheel studs are long enough, bolt manufacturers will tell you minimum you want is the same amount threaded into the nut as the thickness of the stud so . . . if you have 9/16 studs then you want minimum of 9/16 length inside your lug nut.

REDNECK-WELDING
03-03-2007, 02:15 PM
cool...justed wanted to make sure as the tire shop said they wouldnt put them on...they wanted me to buy the expensive ones that i dont need

TWOZEROFOUR
03-03-2007, 02:51 PM
I have also used those, a long time ago we used to lowride s-10's and run whatever mags we could find. Alot of the time with improper back spacing. They worked fine.