PDA

View Full Version : Tires on my truck


Nile
02-12-2007, 03:12 AM
will i be able to fit 33s under my truck with out any problems, its not lifted?[36]

Jroc
02-12-2007, 07:04 AM
if its the one in you sig line then yes! you will lose a bit of your turning radious unless you get off set rims but it will fit with stock rims (up to 12.5 wide)

In The Zone
02-12-2007, 09:40 AM
Should fit no problem u will even have some room for flex still

Nile
02-12-2007, 01:32 PM
yea thought soo cuz i think my stok tires are about as high as 35s or am i wrong? here is a pick

http://i14.photobucket.com/albums/a345/nile69/Picture005.jpg

Kinslayer
02-12-2007, 02:54 PM
as high as 35s? Those are more like 235s

In The Zone
02-12-2007, 04:16 PM
235 75 16 = about 31"

i could be wrong

whitlers
02-12-2007, 04:36 PM
def not 35's haha..those are 31's, my buddy has the same truck as you, he tucked 35 x 12.50 bfg mt's under his no prob, you should be fine with 33's for sure, heck go 35's instead...

Nile
02-14-2007, 06:36 PM
yea i kno if i put 35s under it will rub 33s will do, prob mud terr

MetalMan
02-14-2007, 08:35 PM
235/75's are about 28". That's what my Dakota has. Those look like 31's...you might be able to fit 35's with some fender hacking, I did it on an old 1/2T Dodge. Otherwise 33's will fit fine.

whitlers
02-14-2007, 10:34 PM
yea i kno if i put 35s under it will rub 33s will do, prob mud terr

well no im telling you 35's will fit for sure, no hacking needed but if u wanna go 33's that will be easier on your clutch anyway [36]

nonhighwayservice
02-16-2007, 05:43 PM
I have 35's under my f250 no lift no rubbing no problems

BigBlockChevy
02-16-2007, 05:55 PM
235-75-16 is 30"

235-75-15 is 28"

Nile
02-16-2007, 09:31 PM
yea thanks every one, by the way any one have any tires that will fit 16.5x10 rims?

weiser
02-16-2007, 10:21 PM
This might help a little. Make your own choice. 235 75 R16 to 35s
44355
This is with a 4inch lift.

I still had to cut the bumper to stop the rubbing when turning.

35s are a little hard on the clutch when running 355 gears.
I have to change my gears to 456. This will take it a little lower then stock speed.
[cheers]

whitlers
02-17-2007, 12:01 AM
your truck is alot newer weiser, the late 80's fords were alot higher stock then your mid 90's model so he won't need a lift...agreed on the gearing...stock gears and bigger tires suck assssss...i threw 34's on my truck and i had to go from 4.10's to 4.56's

4doorShorty
02-18-2007, 01:23 AM
http://www.funinbc.com/forum/showthread.php?t=73394

89Ford
02-18-2007, 06:28 PM
finaly someone poasted a linck to my thead....i was to lazy........just get 35s man...youll never regret it, if you get 33s youll just be pissed that you didnt just go for 35's.

cj5sean
02-20-2007, 11:27 PM
Go with 44s lol its a ford it can take it

nykoma
02-21-2007, 06:05 AM
i got 235 85r 16's on my ford ( stock ) thats about as big your getting under it with out rubbing. when you flex[cheers]

Nile
02-21-2007, 01:34 PM
yea ill stick with 33s now i just need to find some