PDA

View Full Version : diff breathers?


redline
02-11-2007, 08:45 PM
where can i get some fittings that i can put in the diffs? so i can attach rubber hose, thanks

HEAVY METAL
02-11-2007, 08:46 PM
i got mine at lordco......

highwaystar
02-11-2007, 09:07 PM
I heard that stock breathers from nissan trucks fit yotas and you can attach a hose quite easily to it.

I got mine from my old work at a hot tub place, they were brass fittings with a long nipple and they were perfect, Im not sure why we had them or what they were for cuz they were in a junk pile, but the 1/4"? hose commonly used for old hot tub push buttons attached perfectly to it.


edit! found the link to nissan mod, has a part #
http://www.off-road.com/toyota/cheaptricks/breathers/

redline
02-11-2007, 10:22 PM
thanks guys, appreciate the help

Toy_Runner
02-11-2007, 10:24 PM
just get pliers and rip the top part off, then a hose will fit on with a hose clamp

redline
02-11-2007, 10:28 PM
just get pliers and rip the top part off, then a hose will fit on with a hose clamp


thats what i thought, but i ripped the top off and not enough room for a clamp.

Toy_Runner
02-11-2007, 10:32 PM
ya there is, small hose clamp. that's what i did, just push hose on futher

stevem
02-11-2007, 10:33 PM
just get pliers and rip the top part off, then a hose will fit on with a hose clamp

thats what i did and they have been on for 3 years now

redline
02-11-2007, 10:44 PM
[cheers] ill try tommorow

StillRYE
02-12-2007, 11:02 AM
I got the fittings from nissan pm norm he got them for me

Pudge
02-12-2007, 11:33 AM
Darren, I bought those for the Chevota from Nissan, bolts right in. When I get home I'll look around to see if I still have the part#.

GOT MUD
02-12-2007, 10:45 PM
just get pliers and rip the top part off, then a hose will fit on with a hose clamp

that's what i did to and they've been like that for at least 2or 3 years now with no problems of being pulled off at all

redline
02-13-2007, 06:37 AM
you guys were right, clamped on to the existing breather.[stoned]
thanks again

flipper
02-13-2007, 06:59 PM
I got brass fittings from lordco.