PDA

View Full Version : What FE Engine?


cj5sean
02-09-2007, 11:27 PM
Hey guys i gotta ask a stupid question. I got a 1976 f-250 with a 390 i think.
Reason im confused is the block has a 352 casting number on the left side of the block just below the head. I bought a starter for it it fits and its designed to fit FE. But if im right ford fe's came in like five different sizes 352? 390 410 428. I tried looking under the disributor pinch plate but the barcode was removed. Any Ideas muchly apreciated'' besides pulling heads and measuring )

mark
02-09-2007, 11:39 PM
yup you got a 352. exact same block as 390 same firing order and everything. its a bonified FE.

cj5sean
02-09-2007, 11:59 PM
So its a different stroke or is it a fifferent bore well wich one is simular to a 390

pumpkin
02-10-2007, 07:30 AM
I don't know if all, but a lot of fe engines were cast 352, regardless of size. Lets see if I can remember the sizes,, 352, 360, 390, 410, 427, 428

boyzen
02-10-2007, 05:48 PM
forgot 406 .the only way to tell what it really is to check the crank it will have stamped #you have to decode.

pumpkin
02-10-2007, 06:10 PM
:dontknow: What can I say, Pretty good for a chevy guy, you gotta admit.

mark
02-10-2007, 11:29 PM
ya the good old indestructible fe tourque beasts but heavy as hell.

cj5sean
02-11-2007, 10:14 PM
Thanks Guys im gonna pull the oil pan and find out the crank # ill let you guys no what engine it is.

4doorShorty
02-12-2007, 12:19 AM
if its stock its a 360. Since its in the belly of an old beast it could be any FE...you guys forgot the 332 FE also.