PDA

View Full Version : carb issue i think?


poostang
01-11-2007, 08:20 PM
ok just bought this bronco 2 off a fellow fibc er and it has a slight issue its got the carb with electric motor on back and whatnot some moto craft piece of shit anyways truck sputters and back fires like ninety it will hi rev for 20 seconds back fire and stall out ect...... any feed back would be appreciated i tryed looking for air/fuel screws but im lost on it help me please

Styx
01-11-2007, 09:03 PM
That would be the infamous "feed back carb"....Very bad little monsters...
Get rid of it and get a non feed back system...You will need a distributor and a module as well. I cant remember what years you need to look for it's been a while since I've done the conversion on one... There use to be a kit of sorts avalible...
[cheers]

poostang
01-11-2007, 09:25 PM
so what do u think the issue would be.. is it fixable.. kinda need transportation by monday.

Ginger Snaps
01-11-2007, 09:46 PM
use the big bronco yo!

90 bucks fills it lol

rubyred
01-12-2007, 09:20 AM
not even close.. try bout 105 and maybe 2 days to work and back

gordwould
01-13-2007, 04:19 PM
pick up acarb for a early or mid 70s capri or mustang and dont worry about the distributor and module and if you need any more info pm me

Always broke
01-13-2007, 11:29 PM
He already has one from me it should work just fine unless the timing is off[cheers]

poostang
01-14-2007, 12:05 AM
ya im quite lost on hooking it up to this thing fawkinfrustrateing

Always broke
01-14-2007, 11:30 AM
Should not be a big problem hook up the linkage then the vacuum and finnally fuel don't forget the gaskets[cheers] that carb even has the ford linkage hook up for you !!!!

poostang
01-14-2007, 02:07 PM
you wanna do it pleasssssse i dont have knowledge ill buy a case of beer for ya

gordwould
01-14-2007, 03:04 PM
iv e offered to help but no phone call yet and if you have the carb already shit it is easy just getter done

Always broke
01-14-2007, 04:40 PM
I'm really busy for the next few weeks but you have all you need to do it maybe Gord could help you put it on should not take very long[cheers]