PDA

View Full Version : 83 f250 heater core removal???


barracuda
01-06-2007, 04:02 PM
83 f250 heater core removal???
anybody have a site that shows all the bolts and everything i have to remove ? any shortCUTs?

FU Toolbag
01-06-2007, 05:12 PM
Take out the glove box and there's a cover right behind it. pull the cover and core should slide out.

Jroc
01-06-2007, 05:18 PM
should be an easy job, no computer shit in the way! dose it have ac?

barracuda
01-06-2007, 05:40 PM
how many bolts? seems as though it is stuck:mad0217:

Jroc
01-06-2007, 05:42 PM
check the firewall their may be bolts through that side as well, also they usualy seal them on with some stuff thats like windsheild glue?

jeepingpw
01-07-2007, 09:51 AM
If you have A/C then pull the glovebox & the cover , then the core comes out in the cab.

If you don't have air, you must pull the whole heater assembly out in the engine bay. The worst 2 bolts are on the bottom. I always remove the screws at the back of the plastic inner fender, bend it out of the way & get at the bottom bolts.

Make sure you get the correct core, the High Output heaters have a larger core.

barracuda
01-07-2007, 04:32 PM
Got it out [cheers] whoever replaced it before (with a second hand one from a wrecker and it looks like it has been leaking for a long time before it blew:mad: )used sealant and used nut and bolt so the heads of the bolt spun (I broke one small part ) the heater says high output .