PDA

View Full Version : exhaust pipe to manifold nuts


a72cj
12-27-2006, 08:33 PM
Hi all
Any ideas on removing the exhaust pipe to manifold nuts on a yj with the 258They are rusted tight and are now rounded. I used a six point socket and figured they would either turn or break but instead they rounded.

jeepboy
12-27-2006, 09:01 PM
Cut the bolts on the side that is being replaced.....if you are replacing the manifold, cut the bolts on that side of the connection so that you don't ruin the part you are keeping.