View Full Version : Q78s and lockrite

12-21-2006, 09:45 PM
My D60 Lockright arrived from Complete Offroad.[36] (http://completeoffroad.com/wsm/i-176_lock_right_locker_dana_60_35_spline.html)

Looks like it and the Q78s will go on my F350 crew.:D

Punk in Drublic
12-22-2006, 11:35 AM
Shaweet i love Q78s. is the truck lifted. those tires look sick on a stock ford:s30x: how much for the locker and is it for hp ro lp (guessin its front)

12-22-2006, 04:23 PM
Yup... its for the front :D $359 US = $430CDN [36]

No... its not lifted. People claim to have good results with a skinny tire up to 35-36" on the 87-97 F350s at stock height, provided the bumper gets shimmedout . The Q78s should stand about 34-1/2" tall with the wear they have. I have a winch bumper on it now too.


12-22-2006, 06:27 PM
i heard its an auto cause you cant drive stick :vroam:

Sweet deal on that lockright, what gears are in the diffs?

12-22-2006, 06:43 PM
i heard its an auto cause you cant drive stick

[15]auto - that's funny chit.

Its stock 4.10s. I seriously thought about going to 3.55 (diesel, mileage, etc) but the tires came cheap enough, and the peer-pressure on the locker was getting too much. ;)

12-25-2006, 02:25 PM
Here's the goods... I was quite surprised the Dana 80 version (that my buddy got) was only 1/2" bigger.


Mr. Bob
12-26-2006, 01:49 AM
Truck looks awsome!!! Front lockers are an amazing upgrade... peer pressure was right... :)

12-28-2006, 09:58 PM
need pics with the tires on...

12-28-2006, 10:13 PM
It's coming.... right after I finish with the water pump [27]

In The Zone
12-29-2006, 09:48 AM
Here's the goods... I was quite surprised the Dana 80 version (that my buddy got) was only 1/2" bigger.


I can here it now when those swampers grab traction and the lock wrong goes BOOM:D

01-26-2007, 02:33 AM
Water pump is done.... [36]

Lockright is in too :party0010:

It got a little late... and there were several beers... so the picture taking kind of dried up. This is as far as I have footage for....

Didn't get it back together last night because of crap balljoint. [27] Got that done today, and finished it off tonight. Took a little test drive up to Eagle and found what I think is the bypass (off to the right). I haven't been up there in 5 years so its all new to me again. :o The locker - talk about point & go! Got my 21' of truck through the little skidder and 'round to the other side of the gate. Lockers rock! :rockhorns:

Mr. Bob
01-26-2007, 11:52 PM
What size tires are you going with??

01-27-2007, 03:24 AM
What size tires are you going with??

Q78 = 35.5x10.8 R16... but they aren't new. ;)

01-31-2007, 03:35 PM